We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega MegaPress 4816 carbon steel 90 degree elbow press by press fitting

Viega

Viega MegaPress 4816 Carbon Steel 90 Degree Elbow 2 in Press x Press

SKU CH-A7J7-6AH8V

Carbon steel 90-degree press elbow joins two 2-inch pipes at 200 psi up to 250 °F

  • 90-degree turn connects two 2 in pipes via press joints
  • Carbon-steel body rated for 200 psi working pressure
  • Operates reliably from 0 to 250 °F
  • MegaPress 4816 design enables fast, flameless installation

2 in Carbon Steel Press Elbow

This Viega MegaPress 4816 fitting joins two 2 in pipes at a 90 degree angle using press connections on both ends. The carbon steel body is rated for a maximum pressure of 200 psi and an operating temperature range of 0 to 250 degrees F. It suits installers who need a flame-free joint on standard carbon steel piping systems.

Thermals noise and power draw

As a passive mechanical fitting, this elbow generates no heat, produces no noise and draws no electrical power during normal operation. The only thermal consideration is the fluid temperature inside the pipe, which must remain within the 0 to 250 degrees F rating. Installers requiring active cooling components or powered valves should select a different product type.

Highlights

  • 90-degree turn connects two 2 in pipes via press joints
  • Carbon-steel body rated for 200 psi working pressure
  • Operates reliably from 0 to 250 °F
  • MegaPress 4816 design enables fast, flameless installation

Specifications

BrandViega

Questions about this item

How is the 2 in press connection on the MegaPress 4816 elbow installed, and what step is often missed?

Use a compatible press tool with the correct jaw size for 2 in carbon steel; the step often missed is verifying the press indicator ring shows full engagement before pressurising the system.

What maintenance or replacement will the MegaPress 4816 elbow need over its service life?

Inspect the press joints periodically for corrosion or leakage; the carbon steel body and EPDM seal are rated to 200 psi and 250 °F, so replace the fitting if seal degradation or pipe movement compromises the joint.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.