We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc nickel-plated steel 45-degree street elbow press x FTG fitting

Viega

Viega MegaPress 45° street elbow 1 in press x FTG 26110

SKU CH-VNM8-JHQ37

A zinc nickel-plated steel 45-degree street elbow connects 1-inch press-fit to FTG for non-potable water systems at 200 psi and 250 degrees F

  • 45° street elbow routes non-potable water efficiently
  • Press-fit and FTG ends join 1 in steel pipe securely
  • EPDM O-ring seals up to 200 psi pressure
  • Zinc nickel-plated steel resists corrosion at 250 °F
  • Viega MegaPress 26110 engineered for reliable installations

Crimp Elbow for Non-Potable Water

The Viega MegaPress 26110 is a crimp elbow fitting designed for non-potable water systems. It provides a 45 degree change of direction between a 1 in press connection and a 1 in FTG connection. The fitting body is steel with a zinc nickel-plated finish and an EPDM O-ring. It suits installers who need a flame-free press joint.

Press-Fit and FTG Ends in Steel

Side A uses a press-fit connection for 1 in pipe while Side B is an FTG end for 1 in copper tube size. The steel construction and zinc nickel coating resist corrosion in the specified environments. No bolt holes or flange features are present on this street elbow. The press system eliminates the need for threading or soldering equipment on site.

Rated for 200 psi and 250 Degrees F

The fitting handles a maximum operating pressure of 200 psi and a maximum operating temperature of 250 Degrees F. These limits define the safe envelope for hot or pressurised non-potable lines. Systems that exceed either value will require a different component rated for higher pressure or temperature.

Highlights

  • 45° street elbow routes non-potable water efficiently
  • Press-fit and FTG ends join 1 in steel pipe securely
  • EPDM O-ring seals up to 200 psi pressure
  • Zinc nickel-plated steel resists corrosion at 250 °F
  • Viega MegaPress 26110 engineered for reliable installations

Specifications

BrandVIEGA

Questions about this item

What is the maximum operating pressure the MegaPress 45° street elbow can handle under sustained use?

The fitting is rated for a maximum operating pressure of 200 psi, which is the limit that applies during continuous service conditions.

How much heat can the MegaPress 45° street elbow withstand when the system runs all day?

The maximum operating temperature is 250 degrees F, so the steel body and EPDM o-ring are designed to handle sustained heat up to that level.

What pipe size and connection type must the existing system have for this 1 inch press x FTG elbow to work?

The system needs a 1 inch pipe for the press-fit connection on side A and a 1 inch copper tube size FTG connection on side B.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.