We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel 45-degree press elbow with matte grey finish

Viega

Viega MegaPress 25250 45 elbow 1-1/2" x 1-1/2

SKU CH-4WRZ-Y7A8T

A 45-degree carbon-steel press elbow joins 1-1/2 inch pipe at up to 200 psi and 250 °F

  • 45-degree press elbow enables quick directional changes in carbon-steel piping
  • Press-to-press connection eliminates threading or welding for faster installation
  • Rated for 200 psi working pressure in hydronic and compressed-air systems
  • Operates reliably from 0 to 250 °F across heating and cooling loops
  • Model 25250 ensures consistent Viega MegaPress quality and fit

Viega MegaPress 45° elbow for 1-1/2" pipe

This carbon steel press fitting joins two 1-1/2 inch tubes at a forty-five degree angle. It is designed for installers who need a permanent, flameless connection in heating, cooling or compressed-air systems rated to two hundred psi.

Press-by-press ends remove the need for threading

The factory-prepared ends accept a standard press tool, cutting installation time and eliminating open-flame permits. No additional sealant or tape is required because the integrated sealing element completes the joint during the press cycle.

Install with a compatible press jaw matched

Common issues arise when the jaw is worn, undersized or misaligned, which can leave an incomplete seal. Ensure the tubing is cut square, deburred and inserted to the marked depth before pressing.

Highlights

  • 45-degree press elbow enables quick directional changes in carbon-steel piping
  • Press-to-press connection eliminates threading or welding for faster installation
  • Rated for 200 psi working pressure in hydronic and compressed-air systems
  • Operates reliably from 0 to 250 °F across heating and cooling loops
  • Model 25250 ensures consistent Viega MegaPress quality and fit

Specifications

BrandVIEGA MEGAPRESS

Questions about this item

Will the carbon-steel 45-degree elbow need periodic inspection or replacement of its press-seal joints?

The carbon-steel body and press connections are designed for permanent installation; no scheduled seal replacement is required if the system operates within the 200 psi and 250 °F limits.

What pressure or temperature limit will be reached first during continuous high-demand operation?

The fitting is rated for a maximum of 200 psi and a temperature ceiling of 250 °F; whichever threshold is met first becomes the limiting factor.

Does the elbow generate noticeable heat or noise when the system runs all day at full pressure?

As a passive press-fit carbon-steel fitting with no moving parts, it produces no operational noise and adds negligible heat beyond the fluid temperature.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.