We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega MegaPress 25155 carbon steel press adapter, 2 inch by 2 inch

Viega

Viega MegaPress 25155 adapter 2 in x 2 in

SKU CH-C65T-Q7WRT

A carbon-steel press-to-female-thread adapter joins two-inch pipe at up to 200 psi and 250 °F

  • Press connection speeds installation on 2 in pipe
  • Carbon steel body handles 200 psi pressure rating
  • Rated for temperatures up to 250 °F in service
  • Female pipe thread mates with standard threaded fittings
  • MegaPress 25155 model ensures consistent press performance

MegaPress 25155 carbon steel adapter

This Viega MegaPress adapter joins a 2 inch press connection to a 2 inch female pipe thread. The body is made from carbon steel and carries part number 25155. It is supplied new and suits press-fit piping systems in commercial and industrial installations. No additional sealing compounds are required for the press end.

Suited for 2 inch press-to-thread transitions

Installers who need a direct 2 inch press-to-thread joint will find this fitting matches the pipe size exactly. It is not intended for smaller diameters, for press-to-press connections, or for systems that exceed the rated pressure or temperature limits. Buyers working with copper, stainless or plastic pipe should select a fitting designed for those materials.

200 psi maximum pressure rating

The adapter is rated for 200 psi at temperatures from 0 to 250 degrees Fahrenheit. This single figure determines whether the fitting meets the design pressure of the piping system. Verify the system pressure before specifying this part.

Highlights

  • Press connection speeds installation on 2 in pipe
  • Carbon steel body handles 200 psi pressure rating
  • Rated for temperatures up to 250 °F in service
  • Female pipe thread mates with standard threaded fittings
  • MegaPress 25155 model ensures consistent press performance

Specifications

BrandVIEGA MEGAPRESS

Questions about this item

What pipe size and wall thickness does the 2 in MegaPress adapter accept?

The fitting connects 2 in carbon steel pipe via press connection on one end and 2 in female pipe thread on the other.

Which tool and jaw size are required to press the 25155 adapter?

A Viega MegaPress press tool with a 2 in jaw set is used; the pipe must be cut square, deburred and fully inserted before pressing.

How often should the EPDM seal on this adapter be inspected or replaced?

Inspect the seal during routine system checks; replace it if leakage appears or after exposure beyond the 250 °F temperature limit.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.