We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel press tee with three connections, brushed metallic finish

Viega

Viega 95130 MegaPress tee 3/4 x 3/4 x 1/2 in

SKU CH-MWCD-W7PRZ

Stainless-steel press tee connects 3/4 in and 1/2 in tubing rated to 200 psi and 250 °F

  • 304 stainless steel resists corrosion in demanding piping systems
  • Press connection on all three ends enables fast, flame-free installation
  • Rated for 200 psi working pressure across the full assembly
  • Operates reliably from 0 to 250 degrees Fahrenheit
  • Meets ASME B31.1, B31.3 and B31.9 piping code requirements

Press Tee for Stainless Systems

The Viega 95130 MegaPress tee joins three stainless-steel tubes in a single press operation. Its 304 stainless construction resists corrosion in hydronic heating, compressed air and industrial process piping. The press-to-connect design eliminates open flames and threading on site.

Installers Who Need Fast, Flame-Free Joints

This tee suits contractors who want a permanent, leak-tight connection without welding or soldering. It is not intended for systems that exceed 200 psi or 250 °F, nor for applications requiring a different alloy or a larger branch size.

Rated for 200 psi and 250 °F

The fitting handles typical hydronic and low-pressure steam loads within the stated pressure and temperature limits. It meets ASTM A312, ASME B31.1, B31.3 and B31.9 standards. Installations beyond these ratings will require a heavier-duty component.

Highlights

  • 304 stainless steel resists corrosion in demanding piping systems
  • Press connection on all three ends enables fast, flame-free installation
  • Rated for 200 psi working pressure across the full assembly
  • Operates reliably from 0 to 250 degrees Fahrenheit
  • Meets ASME B31.1, B31.3 and B31.9 piping code requirements

Specifications

BrandVIEGA

Questions about this item

What press tool and jaw size are needed to install the Viega 95130 MegaPress tee?

The tee uses Press x Press x Press connections for 3/4 in and 1/2 in tube sizes, so you need a compatible press tool with jaws for both diameters.

Can the 304 stainless steel tee join to existing carbon-steel piping in a B31.9 building-service system?

Yes, the fitting meets ASME B31.9 and is made of 304 stainless steel, which is commonly joined to carbon steel using approved transition methods for building-service piping.

How can I verify the joint is holding its 200 psi rating after pressing?

Pressurise the system up to 200 psi and inspect each pressed connection for leaks; the fitting is rated for 0 °F to 250 °F service per the listed standards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.