We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 45-degree street elbow with press-fit and FTG ends

Viega

Viega 77063 ProPress 45 street elbow 1-1/4" x 1-1/4" trap

SKU CH-BX4F-FN8Q6

Copper 45-degree street elbow for potable water systems with press-fit and FTG ends rated to 200 psi and 250 degrees F

  • Press-fit copper elbow installs without soldering
  • 45-degree street design routes pipe around obstacles
  • EPDM O-ring seals potable water to 200 psi
  • Rated for 250 °F maximum operating temperature
  • Meets ASTM B75 and ASTM B88 standards

Copper ProPress 45° street elbow

This 1-1/4-inch copper fitting joins a press-fit tube end to an FTG socket at a forty-five degree angle. It is intended for potable-water systems where a compact directional change is required. The EPDM O-ring provides the seal without solder or flux. The fitting conforms to ASTM B75 and ASTM B88 material standards.

Sustained pressure and temperature performance

The assembly is rated for a maximum operating pressure of 200 psi and a maximum operating temperature of 250 degrees F. These limits apply to continuous service rather than brief test spikes. Copper construction resists scaling and corrosion over long periods in hot-water circulation loops. The press joint maintains integrity through thermal cycling without the fatigue that can affect threaded connections.

Press-fit copper system constraints

The ProPress connection method requires a compatible press tool and jaw set matched to the 1-1/4-inch tube size. Installers must verify that the tubing meets ASTM B88 dimensions for a reliable crimp. The fitting is not designed for gas, compressed-air or hydronic-glycol systems beyond the stated water ratings. Local codes may impose additional restrictions on press-fit joints in concealed locations.

Highlights

  • Press-fit copper elbow installs without soldering
  • 45-degree street design routes pipe around obstacles
  • EPDM O-ring seals potable water to 200 psi
  • Rated for 250 °F maximum operating temperature
  • Meets ASTM B75 and ASTM B88 standards

Specifications

BrandVIEGA PROPRESS

Questions about this item

How much pressure and heat can the ProPress 77063 street elbow handle in continuous service?

The copper fitting with EPDM O-ring is rated for a maximum operating pressure of 200 psi and a maximum operating temperature of 250 Degrees F, so it will maintain its seal during all-day hot-water circulation.

What tools and pipe preparation are required before pressing this 1-1/4" street elbow?

You need a compatible ProPress press tool and jaws for 1-1/4" copper tube, plus a tubing cutter and deburring tool to prepare clean, square ends on Type K, L or M copper pipe meeting ASTM B88.

Will this 45-degree street elbow join directly to an existing 1-1/4" copper fitting without an extra coupling?

Yes, the street design gives a press-fit socket on one end and a plain FTG end on the other, allowing the FTG end to slide into another 1-1/4" ProPress fitting or copper adapter for a direct connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.