We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight steel coupling, zinc nickel finish, press-fit and FTG ends

Viega

Viega 26006 Straight Steel Coupling FTG 1 in Press-fit 1/2 in

SKU CH-W933-VR8F9

Steel straight adapter with FTG and press-fit ends, zinc nickel-plated, rated 125 psi and 180 Degrees F

  • Straight adapter joins 1 in FTG to 1/2 in Press-fit for direct transitions
  • Steel body with zinc-nickel plating resists corrosion in air, fuel and natural gas lines
  • HNBR O-ring seals reliably at up to 125 psi working pressure
  • Rated for continuous service at 180 °F maximum operating temperature
  • 3 7/32 in overall length fits tight plumbing spaces

Straight Steel Press-Fit Coupling

The Viega 26006 is a straight adapter made from zinc nickel-plated steel. It joins a 1 in copper tube size FTG connection to a 1/2 in press-fit connection. The fitting is rated for air, fuel and natural gas systems. It ships new and ready for professional installation.

125 psi Maximum Operating Pressure

This coupling handles a maximum operating pressure of 125 psi. The HNBR O-ring material supports the sealed joint. The overall length measures 3 7/32 in. Systems exceeding this pressure rating require a different fitting specification.

HNBR O-Ring Sealing Element

The included HNBR O-ring provides the seal for the press-fit connection without separate thread sealant or tape. The zinc nickel-plated finish protects the steel body from corrosion. No bolts, flanges or additional hardware are supplied or required for the press joint.

Highlights

  • Straight adapter joins 1 in FTG to 1/2 in Press-fit for direct transitions
  • Steel body with zinc-nickel plating resists corrosion in air, fuel and natural gas lines
  • HNBR O-ring seals reliably at up to 125 psi working pressure
  • Rated for continuous service at 180 °F maximum operating temperature
  • 3 7/32 in overall length fits tight plumbing spaces

Specifications

BrandVIEGA

Questions about this item

What does the 125 psi rating mean once the coupling is installed in a real system?

It sets the maximum steady pressure the joint can hold without leaking, so the system pressure must stay at or below 125 psi during normal operation.

How does the press-fit connection limit what pipe or tooling can be used?

The press-fit end requires a compatible press tool and jaw set sized for 1/2 in pipe; it cannot be threaded, soldered or used with push-fit rings.

What physical space and mounting does the straight adapter need?

The body is 3 7/32 in long with a 1 in FTG end and a 1/2 in press-fit end; it fits inline between those two pipe sizes and needs no bolt holes or flange clearance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.