We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount with adjustable bracket arms visible

VideoSecu

VideoSecu Tilt TV Wall Mount 32-75 Inch 165 lbs VESA 600x400 Black

SKU CH-4TAK-CDE1P

A black tilt wall mount holding 32–75 inch screens up to 165 lbs with VESA patterns to 600×400 mm and 15° tilt

  • Mount StyleTilt
  • ColorBlack
  • TV Size Capacity< 70"
  • TV Weight CapacityMax. load 160 lbs.
  • VESA CompatibleYes
  • Tilt 15 degrees for glare-free viewing
  • Holds TVs up to 165 lbs with heavy-gauge steel
  • Fits VESA patterns up to 600x400 mm
  • Low 1.9 inch profile keeps screen close to wall
  • Mounts to studs spaced up to 24 inches apart

Tilt mount for 32-75 inch screens

The black steel tilt mount accepts flat-panel screens from 32 to 75 inches and supports VESA hole patterns up to 600x400mm. It holds a maximum load of 165 lbs and provides 15 degrees of forward tilt for glare reduction. The low-profile design sits 1.9 inches from the wall.

Installation on wood studs up to 24 inches apart

The mount secures to most wood studs spaced up to 24 inches apart using the included hardware. Common issues include mismatched VESA patterns outside the 200-660mm width or 100-400mm height range and screens exceeding the 165 lb limit. Verify hole spacing and weight before mounting.

Check VESA pattern and screen weight first

Measure the vertical and horizontal distances between the four mounting holes on the back of your screen. Confirm the pattern falls within the supported 200-660mm wide and 100-400mm high range. Weigh the screen to ensure it does not exceed 165 lbs. Note that certain Panasonic Plasma models are not compatible.

Highlights

  • Tilt 15 degrees for glare-free viewing
  • Holds TVs up to 165 lbs with heavy-gauge steel
  • Fits VESA patterns up to 600x400 mm
  • Low 1.9 inch profile keeps screen close to wall
  • Mounts to studs spaced up to 24 inches apart

Specifications

Mount StyleTilt
ColorBlack
TV Size Capacity< 70"
TV Weight CapacityMax. load 160 lbs.
VESA CompatibleYes

Questions about this item

How do I confirm the mount is holding the TV at the 15-degree tilt after installation?

Verify the TV sits at the set angle without drifting, the low-profile depth measures 1.9 inches from wall to TV back, and the VESA brackets are fully seated on the mounting plate.

What hardware comes in the box and what must I supply separately?

The package includes the tilt bracket, wall plate and VESA mounting screws; you must provide lag bolts or concrete anchors rated for 165 lbs and a stud finder for 24-inch stud spacing.

Which VESA pattern and weight limit should I match to my screen?

Choose a TV with VESA holes between 200x100 mm and 600x400 mm and a weight no greater than 165 lbs; the mount fits most 32-60 inch sets and some up to 75 inch.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.