VideoSecu
VideoSecu PWD91A-N1 9 Channel 12V DC CCTV Power Supply Box with Key Lock
Supplies 12 V DC power to nine cameras with individual fuses, LED indicators and a lockable steel enclosure
- TypeOther
- SpecificationsSupport up 9 cameras, 9 Individually outlet pairs
- Features• Output: DC 12V • Max. Amp: 1 Amp/Channel, 5 Amp total • An
- Package ContentsOne 9 ports 12V DC power box, 6 ft AC Power Cord, Key lock
- Powers up to 9 cameras from one regulated 12 V box
- Each channel delivers 1 A with resettable fuse protection
- Surge-protected main switch guards all connected devices
- Separate low-voltage and high-voltage sections prevent damage
- LED indicators show instantly which channel has a fault
9-Channel 12V CCTV Power Distribution
The VideoSecu PWD91A-N1 supplies regulated 12 V DC to as many as nine cameras from a single enclosure. Each channel delivers up to 1 A with a 5 A combined limit, and every output has its own resettable fuse and LED indicator. A master switch with integral surge protection and separated high- and low-voltage sections add further safety.
Installers wanting fused, monitored outputs
Technicians who need individual circuit protection and visual fault indication will benefit from the per-channel fuses and red short-circuit LEDs. The key-locked metal box suits permanent indoor installations where tamper resistance matters. Buyers who require more than nine camera feeds or a higher total current budget should consider a larger distribution unit.
5 A total current budget
The 5 A aggregate ceiling is the decisive figure: nine cameras drawing 1 A each would exceed it, so the installer must confirm actual per-camera draw before committing. If the combined load stays within 5 A, the box provides fused, surge-protected power with lockable security; if not, a higher-capacity supply is required.
Highlights
- Powers up to 9 cameras from one regulated 12 V box
- Each channel delivers 1 A with resettable fuse protection
- Surge-protected main switch guards all connected devices
- Separate low-voltage and high-voltage sections prevent damage
- LED indicators show instantly which channel has a fault
Specifications
| Brand | VideoSecu |
|---|---|
| Model | PWD91A-N1 |
| Type | Other |
| Specifications | Support up 9 cameras, 9 Individually outlet pairs |
| Features | • Output: DC 12V • Max. Amp: 1 Amp/Channel, 5 Amp total • An internal built on/off switch • Main power switch with Integral Surge Protection • Individual Reset-able Fuses Output Protection • Individual LED power indication, the red light shorts indicator helps you to know which camera is not working • Separate spaces for low voltage and high voltage operation to protect from high voltage damages |
| Package Contents | One 9 ports 12V DC power box, 6 ft AC Power Cord, Key lock |
Questions about this item
How much heat or noise does the PWD91A-N1 produce when powering nine cameras continuously?
The unit has no fan and relies on passive cooling, so it runs silently; heat output is low because each channel is limited to 1 Amp and the total draw is capped at 5 Amp.
What cables or connectors must I already have to attach cameras to the nine outlet pairs?
Each camera needs a standard DC 12 V plug that fits the individual outlet pairs; the box includes a 6 ft AC mains cord but does not supply camera-side power leads.
Will the box protect older analogue cameras that only accept 12 V DC?
Yes — the output is a regulated DC 12 V, each channel has a resettable fuse and the main switch includes integral surge protection, so legacy cameras are safeguarded from over-current and voltage spikes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



