VideoSecu
VideoSecu MPC4B Ceiling TV Mount 39-60in VESA 600x400 100lbs 900mm pole
Ceiling mount holds 39-60 inch screens up to 100 lbs with VESA patterns to 600x400 mm, 12° forward or 5° backward tilt, 900 mm pole and cable routing
- NameTV Ceiling Mount
- Mount StyleCeiling Mount
- ColorBlack
- TV Size Capacity< 60"
- TV Weight CapacityMax Load Capacity: 100bs
- VESA Compatible600x400/ 500x300/ 400x400/ 400x300/ 400x200/ 300x300/ 300x20
- Fits most 39-60 inch TVs and some LED up to 65 inch
- Supports VESA patterns from 200x100mm up to 600x400mm
- Holds displays up to 100lbs or 45kg
- Cable through 900mm pole keeps wires hidden for clean look
- Tilt adjustable 12 degrees forward and 5 degrees backward
Ceiling TV mount for 39-60 inch screens
The VideoSecu MPC4B is a ceiling mount built for flat-panel displays from 39 to 60 inches, with some LED models up to 65 inches supported. It accepts VESA hole patterns from 200x100mm up to 600x400mm and carries a maximum load of 100lbs. Heavy-gauge steel with a black powder-coated finish provides the structural strength. The fixed extension pole measures 900mm to position the screen at the required drop.
Cable routing and tilt adjustment
A hollow pole allows cables to run inside for a clean installation without visible wiring. The mount offers 12 degrees of forward tilt and 5 degrees of backward tilt to set the viewing angle. Post-installation level adjustment lets you fine-tune alignment after the hardware is secured. The ceiling plate dimensions are 150x120x90.5mm and the pole is designed for a 1.5 inch pipe mount interface.
Exclusions and constraints
This unit does not fit Panasonic plasma TVs that use a 684x300mm VESA pattern, so buyers with those models need a different solution. Screens heavier than 100lbs exceed the rated capacity and are not supported. The pole length is fixed at 900mm, so installations requiring a shorter or longer drop cannot use this mount. The mount style is ceiling-only and cannot be used on a wall.
Highlights
- Fits most 39-60 inch TVs and some LED up to 65 inch
- Supports VESA patterns from 200x100mm up to 600x400mm
- Holds displays up to 100lbs or 45kg
- Cable through 900mm pole keeps wires hidden for clean look
- Tilt adjustable 12 degrees forward and 5 degrees backward
Specifications
| Brand | VideoSecu |
|---|---|
| Model | MPC4B |
| Name | TV Ceiling Mount |
| Mount Style | Ceiling Mount |
| Color | Black |
| TV Size Capacity | < 60" |
| TV Weight Capacity | Max Load Capacity: 100bs |
| VESA Compatible | 600x400/ 500x300/ 400x400/ 400x300/ 400x200/ 300x300/ 300x200/ 200x200/ 200x100mm or any holes patterns from 200x100mm to 600x400mm |
| Feature | *Cable through ceiling pole keep wires hidden to keep a clean look; Lift and twist for height adjustment and lock into place; Premium quality: Heavy gauge steel construction with powder coated black finish |
Questions about this item
How do I route cables through the 900 mm ceiling pole during installation?
Feed all wires up through the hollow pole before securing the ceiling plate, then pull them out at the TV bracket end to keep them hidden.
What hardware might need replacement after long-term use?
The tilt-lock bolts and height-adjustment collar can loosen over time; keep spare M6 or M8 set screws matching the pole's 1.5 inch thread.
At what tilt angle does the 100 lb load limit become critical?
The 12 degree forward tilt shifts the centre of gravity furthest from the pole, so that position reaches the 100 lb rating first under sustained load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



