We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount with two arms, quick-release tabs, end caps and bubble level

VideoSecu

VideoSecu MP409B-A6 tilt TV wall mount for 26-42 inch TVs up to 55lbs

SKU CH-BA2W-9GR0A

Tilting wall bracket holds 26-42 inch screens up to 55lbs with 10° forward tilt and quick-release arms

  • NameTilt TV Wall Mount
  • Mount StyleTilting Low-Profile
  • ColorBlack
  • MovableTilt 10° forward, Depth 2"
  • TV Size Capacity< 50"
  • TV Weight Capacity55lbs
  • Easy installation with quick release tabs on both arms
  • Adjustable 10° forward tilt for better viewing angles
  • Supports screens up to 55lbs with heavy-duty steel construction
  • Fits VESA patterns from 100x100mm to 400x400mm
  • Low-profile design holds display 2" from the wall

Tilt TV Wall Mount for 26-42 Inch Screens

The VideoSecu MP409B-A6 is a low-profile tilting bracket designed for flat-panel displays between 26 and 42 inches. It supports VESA patterns from 100x100mm up to 400x400mm and holds screens weighing up to 55lbs. The mount sits about two inches from the wall and tilts 10 degrees forward for a better viewing angle.

Suits standard living-room TVs.

This bracket works well for typical 26 to 42 inch LCD, LED or plasma sets that fall within the 55lb limit and VESA range. Buyers with screens larger than 42 inches, heavier panels, or VESA holes wider than 400mm should look at a different mount. The supplier also warns that pre-2013 models above 42 inches are not compatible.

Verify VESA pattern, weight

Measure the mounting holes on the back of your TV to confirm they fit within the 100 to 400mm square range. Weigh the display to ensure it does not exceed 55lbs. Check that your wall studs are spaced up to 16 inches apart so the bracket can be secured properly.

Highlights

  • Easy installation with quick release tabs on both arms
  • Adjustable 10° forward tilt for better viewing angles
  • Supports screens up to 55lbs with heavy-duty steel construction
  • Fits VESA patterns from 100x100mm to 400x400mm
  • Low-profile design holds display 2" from the wall

Specifications

BrandVideoSecu
ModelMP409B-A6
NameTilt TV Wall Mount
Mount StyleTilting Low-Profile
ColorBlack
MovableTilt 10° forward, Depth 2"
TV Size Capacity< 50"
TV Weight Capacity55lbs
VESA Compatible400x400/ 400x300/ 400x200/ 300x300/ 300x200/ 200x200/ 200x100/ 100x100mm or any holes patterns within 100-400mm wide and 100-400mm high
Feature*Convenient quick release tabs on both mounting arms for quick and easy installation *New end caps cover locking provides a clean side appearance view *Built-in bubble level offers accurate and easy installation *Heavy duty steel construction *Tilt 10° forward, Depth 2"

Questions about this item

Does my TV need a specific VESA hole pattern to fit the MP409B-A6 mount?

The mount accepts any VESA pattern between 100x100mm and 400x400mm, covering 100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x300 and 400x400mm standards.

Will this tilt mount work with a pre-2013 plasma screen that has 400x400mm holes?

The manufacturer warns that the MP409B-A6 does not fit 42-inch or larger TVs manufactured before 2013, even if the VESA pattern matches.

How can I verify the mount is level and secure once the TV is hanging?

Use the built-in bubble level during installation, then confirm the quick-release tabs on both arms are fully engaged and the end-cap locks are closed for a flush side view.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.