We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel TV wall mount with swivel tilt bracket and removable TV plate

VideoSecu

VideoSecu ML411B Swivel Tilt TV Mount 15-29" VESA 75x75/100x100 44lbs

SKU CH-301S-YE14X

Swivel-tilt wall bracket holds 15–29 inch screens up to 44 lbs on VESA 75×75 or 100×100, with ±5° tilt, ±90° swivel and 360° rotation

  • NameSwivel Tilt TV Monitor Wall Mount
  • Mount StyleTilting Low-Profile/Swiveling
  • ColorBlack
  • MovableTilt +/-5º, Swivel +/- 90°, Rotates 360º, Depth: 3"
  • TV Size Capacity< 30"
  • TV Weight CapacityMax. load 44 lbs.
  • Swivels 90° left or right for wide-angle viewing
  • Tilts 5° up or down to reduce glare
  • Rotates 360° between portrait and landscape
  • Supports VESA 75x75 and 100x100 mounting patterns
  • Holds screens up to 44 lbs on a single stud

VideoSecu ML411B Swivel Tilt Mount

The VideoSecu ML411B is a swivel tilt wall bracket for flat-panel screens from 15 to 29 inches. It suits home offices, bedrooms or commercial displays where a low-profile mount with full motion is required. The bracket holds displays up to 44 lbs and fits VESA 75x75mm or 100x100mm patterns. It mounts to a single wall stud for a secure installation.

Post-Install Level and Removable Plate

Heavy-duty steel with a powder-coated black finish provides strength and a clean appearance. Post-installation level adjustment lets you fine-tune the screen after hanging so it sits perfectly straight. The removable TV plate allows one person to attach the display to the wall bracket without assistance. These features simplify setup and ensure a professional result.

Verify VESA Pattern Weight and Stud Spacing

Confirm your screen uses a 75x75mm or 100x100mm VESA hole pattern and weighs 44 lbs or less. The mount requires a single wood stud for anchoring; check stud location matches your desired screen position. Ensure 3 inches of clearance from the wall is acceptable for your space. Tilt range is limited to +/-5 degrees and swivel to +/-90 degrees.

Highlights

  • Swivels 90° left or right for wide-angle viewing
  • Tilts 5° up or down to reduce glare
  • Rotates 360° between portrait and landscape
  • Supports VESA 75x75 and 100x100 mounting patterns
  • Holds screens up to 44 lbs on a single stud

Specifications

BrandVideoSecu
ModelML411B
NameSwivel Tilt TV Monitor Wall Mount
Mount StyleTilting Low-Profile/Swiveling
ColorBlack
MovableTilt +/-5º, Swivel +/- 90°, Rotates 360º, Depth: 3"
TV Size Capacity< 30"
TV Weight CapacityMax. load 44 lbs.
VESA Compatible100x100mm (4"x4") or 75x75mm (3"x3")
Feature*Heavy duty steel construction with powder coated black finish *Post-installation level adjustment for screen perfectly level *Removable TV plate designed for single-person installation *Single stud mounting *Tilt +/-5º, Swivel +/- 90°, Rotates 360º, Depth: 3"

Questions about this item

Will the steel arm or the removable TV plate need periodic tightening or replacement?

The heavy-duty steel construction with powder-coated finish is built for long-term stability; no routine tightening or part replacement is specified.

What stops the mount from tilting further when I push the screen to the +/-5 degree limit?

The tilt mechanism is fixed at +/-5 degrees forward or backward; the mechanical stop at that angle is the first limit reached under sustained adjustment.

Does the bracket generate any heat or noise when the TV stays swivelled at 90 degrees all day?

The mount has no moving electronics, fans or motors, so it produces no heat and no audible noise regardless of swivel position.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.