VideoSecu
VideoSecu CBRG1796-N1 BNC Male to BNC Male Cable 6 ft Black
A 6 ft BNC male-to-male patch cable with moulded nickel connectors for CCTV and coax Ethernet links
- TypeConnector
- Specifications• BNC male to BNC male • 6 feet length • Black color
- Package Contents1 x 6 Feet Cable
- BNC male connectors fit standard surveillance equipment
- Six-foot run covers typical camera-to-DVR distances
- Black jacket blends with dark installations
- Fully moulded nickel plugs resist corrosion and signal loss
- Single cable in pack keeps setup simple
VideoSecu RG179 BNC Cable
This VideoSecu CBRG1796-N1 cable provides a direct BNC male to BNC male connection for surveillance installations. It uses RG179 coaxial construction with fully moulded nickel connectors for reliable signal retention. The six-foot length suits short runs between cameras, recorders or distribution panels. Black jacket colour blends with typical security wiring.
Practical Limits of RG179 Coax
RG179 is a thin coaxial type intended for short-distance analogue video or low-bandwidth data links. Signal attenuation increases noticeably beyond a few metres, so the six-foot span is near the practical maximum for clean composite video. The cable is not rated for high-frequency digital protocols such as HD-SDI or long Ethernet-over-coax runs. Installers should keep total link length within the camera manufacturer’s specified limit.
Check Connector Gender and Run Length
Verify that both devices present female BNC ports; this cable will not mate with male or RCA interfaces without an adapter. Confirm that the six-foot reach covers the exact path between mount and recorder, allowing slack for strain relief. Ensure the installation environment accepts a non-plenum black PVC jacket if local codes apply.
Highlights
- BNC male connectors fit standard surveillance equipment
- Six-foot run covers typical camera-to-DVR distances
- Black jacket blends with dark installations
- Fully moulded nickel plugs resist corrosion and signal loss
- Single cable in pack keeps setup simple
Specifications
| Brand | VideoSecu |
|---|---|
| Model | CBRG1796-N1 |
| Type | Connector |
| Specifications | • BNC male to BNC male • 6 feet length • Black color |
| Package Contents | 1 x 6 Feet Cable |
Questions about this item
Is the 6 ft length right for linking a camera to a nearby DVR or should I choose a longer run?
The 6 ft cable suits short runs such as a camera mounted close to the recorder; for greater distances you would need a longer cable.
What does the RG179 designation tell me about signal loss once the cable is installed?
RG179 is a thin coaxial type; over 6 ft it carries standard analogue video with minimal attenuation.
The cable uses BNC male connectors — what equipment does that interface actually fit?
BNC male plugs mate with female BNC ports found on most analogue CCTV cameras, DVRs and coaxial Ethernet adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



