Victor Thermal Dynamics
Victor Thermal Dynamics 1-1330-1 SL100 7-5202 plasma cutter torch 20 ft 30-100 A
Handheld plasma cutting torch with a 20 ft cable rated for 30 to 100 A and 60 percent duty cycle
- TypeArc Welders/Plasma Cutter Consumables & Accessorie
- 20 ft cable gives extended reach on the job
- 30 to 100 A range covers light and medium cutting tasks
- 60 percent duty cycle supports sustained cutting periods
- Compatible with Cutmaster 102 and 152 series machines
- Handheld SL100 torch designed for plasma cutting applications
Victor Thermal Dynamics SL100 Plasma Torch
This Victor Thermal Dynamics SL100 plasma torch carries model number 7-5202 and ships with a 20 ft cable. It is built for handheld plasma cutting at 30 to 100 A with a 60 percent duty cycle and fits Cutmaster 102 and Cutmaster 152 systems. The torch uses a rear RPT connection and is rated to a maximum of 120 A for medium-duty work.
Suited for Cutmaster 102 and 152 operators
Welders running Thermal Dynamics Cutmaster 102 or 152 units who need a replacement or spare SL100 torch with a 20 ft lead will find direct compatibility. Shops that require a different amperage range, a front-connection torch, or a longer cable should look at other configurations because this model is fixed at 30 to 100 A and rear RPT only.
Fits Cutmaster systems with rear RPT
The torch plugs straight into Cutmaster 102 and 152 machines equipped with rear RPT (O2B) ports, so no adapter is needed. Its 20 ft lead gives reach around a workbench or small fabrication table while the 60 percent duty cycle at 100 A supports sustained medium-duty cutting without overheating the torch head.
Highlights
- 20 ft cable gives extended reach on the job
- 30 to 100 A range covers light and medium cutting tasks
- 60 percent duty cycle supports sustained cutting periods
- Compatible with Cutmaster 102 and 152 series machines
- Handheld SL100 torch designed for plasma cutting applications
Specifications
| Brand | THERMAL DYNAMICS |
|---|---|
| Type | Arc Welders/Plasma Cutter Consumables & Accessorie |
Questions about this item
Which power-source models will the SL100 7-5202 torch connect to?
The torch fits Cutmaster 102 and Cutmaster 152 units plus the 1-1330, 1-1331, 1-1730 and 1-1731 series listed in the compatibility data.
Will the 60 percent duty cycle at 100 A limit work on my older Cutmaster 102?
Yes — the torch is rated for 30-100 A at 60 percent duty cycle, matching the Cutmaster 102 output range.
How do I verify the torch is operating correctly after installation?
Confirm a stable arc at the chosen amperage, check that the 20 ft lead stays cool during a 60 percent duty-cycle test cut, and ensure the rear RPT connection remains tight.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
