Victor
Victor SR260A-510 Single Stage Acetylene Regulator 15 psi 2.5 in
Single-stage acetylene regulator delivers up to 15 psig outlet pressure through a forged brass body with a 2.5 in. diameter
- Size/Dimensions2"
- MaterialForged Brass
- TypeSingle Stage, Medium Duty
- Single-stage design gives steady acetylene flow up to 15 psig
- Forged brass body resists corrosion and stands up to workshop wear
- CGA 510 inlet with .825-14 NGO female thread fits standard acetylene cylinders
- 9/16-18 UNF male outlet connects directly to common welding hoses
- 5 in gauge face shows pressure clearly at a glance
Victor SR260A-510 Acetylene Regulator
The Victor SR260A-510 is a single-stage, medium-duty gas regulator designed for acetylene applications. It features a forged brass body with a 2.5 in. diameter and a neoprene diaphragm. The unit delivers a maximum outlet pressure of 15 psig and uses a T-handle control for adjustment. It is supplied new for general-purpose welding use.
Suits acetylene cutting and heating up to 15 psig
This regulator suits welders and fabricators who need a medium-duty, single-stage unit for acetylene supply at pressures up to 15 psig. It fits CGA 510 cylinder valves with a 0.825 in.-14 female inlet and provides a 9/16 in.-18 UNF male outlet. Buyers who need a two-stage design for more stable outlet pressure as the cylinder empties should look at a different model.
Direct cylinder mount with T-handle adjustment
Installation is a direct connection to the CGA 510 cylinder valve using the 0.825 in.-14 female nut; no extra fittings are required. The T-handle allows hand-tight pressure setting without tools. A common issue is cross-threading the inlet nut on the cylinder valve, so align threads carefully before tightening. Ensure the outlet connection matches the hose fitting to avoid leaks.
Highlights
- Single-stage design gives steady acetylene flow up to 15 psig
- Forged brass body resists corrosion and stands up to workshop wear
- CGA 510 inlet with .825-14 NGO female thread fits standard acetylene cylinders
- 9/16-18 UNF male outlet connects directly to common welding hoses
- 5 in gauge face shows pressure clearly at a glance
Specifications
| Brand | Victor |
|---|---|
| Size/Dimensions | 2" |
| Material | Forged Brass |
| Type | Single Stage, Medium Duty |
Questions about this item
What inlet fitting must my acetylene cylinder already have for this CGA 510 regulator to connect?
The cylinder needs a CGA 510 valve outlet with a 0.825 in.-14 NGO female thread to match the regulator inlet.
Will the 9/16 in.-18 UNF male outlet thread fit the welding hose I already use?
Yes, if your hose has a standard 9/16 in.-18 UNF female fitting it will thread directly onto the regulator outlet.
How can I confirm the regulator is delivering the correct pressure after I install it?
Watch the outlet gauge; it should read up to 15 psig when you open the cylinder valve and adjust the T-handle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
