Victor
Victor Gas Welding Outfit G150 Series Cuts 1/2 Inch Welds 1/4 Inch
Complete oxy-acetylene kit cuts 1/2 inch and welds 1/4 inch with regulators, torch, hose, cylinders and accessories included
- TypeGas Welding Outfits
- Cuts steel up to 1/2 inch with CA1260 cutting attachment
- Welds material up to 1/4 inch using 0-W-J and 2-W-J nozzles
- Includes 12.5 ft dual hose for extended reach
- Two-stage regulation via R150-200 and R150-540 regulators
- Ready-to-use kit with goggles, striker, tank key and check valve
Victor G150 Gas Welding Outfit
The Victor G150 Series is a new gas welding outfit designed for acetylene service. It combines a torch handle, cutting attachment, regulators and accessories in one package for metal fabrication tasks. The kit suits workshops and job sites where portable oxy-fuel cutting and welding are required. It provides the core components to start work immediately.
Bundled Regulators Hoses and Safety Gear
The outfit includes single-stage oxygen and fuel regulators with CGA-200 and CGA-540 inlet connections. A 12.5 ft dual 3/16 in hose set links the regulators to the torch handle. Also supplied are a striker, tank key, goggles and check valve for safe ignition and cylinder handling. These included items remove the need to source separate regulators, hose or basic safety equipment.
Cuts Half Inch Welds Quarter Inch Capacity
The cutting attachment handles material up to 1/2 inch thick while the welding nozzles cover up to 1/4 inch thickness. A 90-degree head angle on the cutting attachment aids access in tight joints. The Victor 3 series tips and 0-W-J plus 2-W-J nozzles address light to medium plate work. Thicker sections or high-volume production will exceed the rated capacity of this outfit.
Highlights
- Cuts steel up to 1/2 inch with CA1260 cutting attachment
- Welds material up to 1/4 inch using 0-W-J and 2-W-J nozzles
- Includes 12.5 ft dual hose for extended reach
- Two-stage regulation via R150-200 and R150-540 regulators
- Ready-to-use kit with goggles, striker, tank key and check valve
Specifications
| Brand | Victor |
|---|---|
| Type | Gas Welding Outfits |
Questions about this item
How often should the 12.5 ft dual hose and 3 Series cutting tips be inspected or replaced?
Inspect the 12.5 ft dual 3/16 in hose and Victor 3 Series cutting tips before each use; replace them if you see cracks, wear or tip erosion to maintain cutting performance.
What limits cutting capacity first during prolonged work with the CA1260 attachment?
The outfit cuts up to 1/2 inch and welds up to 1/4 inch; sustained cutting at the 1/2 inch maximum will reach the thickness limit before the regulator or torch handle becomes the bottleneck.
How hot does the 103-01FP torch handle get and how loud is the striker during all-day use?
The 103-01FP handle warms with continuous flame but stays manageable with gloves; the striker produces a sharp click each ignition but no continuous noise during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
