Victor
Victor 540/300 Journeyman II EDGE 2.0 welding outfit
Heavy-duty acetylene outfit for cutting, heating and welding with regulators, torch handle and cutting attachment
- TypeGas Welding Outfits
- Heavy-duty acetylene cutting with CA2460+ attachment
- Precise oxygen regulation via ESS42-150-540 regulator
- Reliable acetylene control using ESS42-15-300 regulator
- Versatile 90-degree head angle for tight joints
- Complete outfit includes 315FC+ torch handle
Journeyman II EDGE 2.0 outfit
This Victor 540/300 Journeyman II EDGE 2.0 outfit is a complete gas welding system for acetylene cutting, heating and welding tasks. It ships new and includes the CA2460+ cutting attachment, 315FC+ torch handle, and two regulators for oxygen and acetylene service. The single-stage regulators connect via CGA-540 and CGA-510 inlets with 9/16 in -18 outlet threads.
Professional fabricators and maintenance crews
The kit suits workshops that need a heavy-duty acetylene setup with a 90-degree head angle for standard plate work. It is not for operators who require a fuel gas other than acetylene, such as propane or propylene, because the regulators and tips are acetylene-specific. Buyers needing multi-stage pressure control or a different inlet standard should look elsewhere.
CGA-540 and CGA-510 inlet connections
The regulators accept CGA-540 for oxygen and CGA-510 for acetylene cylinders, delivering outlet connections of 9/16 in -18M RH and LH respectively. This inlet pair decides whether the outfit matches your existing gas supply. Verify your cylinder valves before purchasing.
Highlights
- Heavy-duty acetylene cutting with CA2460+ attachment
- Precise oxygen regulation via ESS42-150-540 regulator
- Reliable acetylene control using ESS42-15-300 regulator
- Versatile 90-degree head angle for tight joints
- Complete outfit includes 315FC+ torch handle
Specifications
| Brand | Victor |
|---|---|
| Type | Gas Welding Outfits |
Questions about this item
What inlet connections must my gas cylinders have to attach the ESS42 regulators?
The oxygen regulator uses a CGA-540 inlet and the acetylene regulator uses a CGA-510 inlet, matching standard cylinder valves for each gas.
Will the 9/16 in -18 outlet threads on the regulators connect to my existing hoses?
Yes, both regulators have 9/16 in -18 outlets, RH for oxygen and LH for acetylene, which are the industry-standard hose fitting threads.
How can I confirm the outfit is ready to cut after I connect everything?
Open the cylinder valves, set the regulator pressures, open the torch valves and ignite; a stable, neutral flame from the CA2460+ cutting attachment shows the system is working.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
