Victor
Victor 4000-9376 single-stage regulator station 1/4 in
Single-stage regulator station delivers 1 to 22 psi for non-corrosive gases with 1/4 in FNPT connections and ETL, ISO compliance
- Single-stage design simplifies gas control for lab use
- 1 to 22 psi delivery range suits low-pressure applications
- Brass body with stainless-steel diaphragm resists corrosion on non-corrosive gases
- ETL and ISO standards confirm regulated manufacturing quality
- 3,000 psi maximum inlet handles high-pressure supply cylinders
Victor 4000-9376 single-stage regulator station
The Victor 4000-9376 is a single-stage regulator station designed for non-corrosive, non-toxic gas service in laboratory applications. It features a brass body with a stainless steel diaphragm and 1/4 in FNPT inlet and outlet connections. The unit is ETL and ISO compliant and carries a California Proposition 65 warning for a chemical known to cause cancer.
Suits labs needing fixed 1 to 22 psi delivery
This regulator suits laboratory setups that require a steady delivery pressure between 1 and 22 psi from a maximum 3,000 psi inlet supply. It is not for operators who need multi-stage pressure reduction for ultra-stable output or for systems handling corrosive or toxic gases. Buyers needing different connection sizes or higher delivery ranges should look at other models.
Brass body and stainless diaphragm handle
Under sustained load the brass body and stainless steel diaphragm maintain the set delivery pressure across the 1 to 22 psi range while the supply gauge monitors up to 3,000 psi inlet pressure. Single-stage construction means outlet pressure will rise gradually as the supply cylinder empties, so periodic adjustment is required during long runs. The 1 31/32 in gauges provide clear pressure reading throughout extended use.
Highlights
- Single-stage design simplifies gas control for lab use
- 1 to 22 psi delivery range suits low-pressure applications
- Brass body with stainless-steel diaphragm resists corrosion on non-corrosive gases
- ETL and ISO standards confirm regulated manufacturing quality
- 3,000 psi maximum inlet handles high-pressure supply cylinders
Specifications
| Brand | VICTOR |
|---|
Questions about this item
What gas-supply fitting does the Victor 4000-9376 need on the cylinder side?
The inlet is a 1/4 in FNPT connection rated for up to 3,000 psi supply pressure.
Can the 1/4 in outlet on this regulator serve my existing torch hoses?
Yes, the outlet is also 1/4 in FNPT and delivers 1 to 22 psi for non-corrosive, non-toxic gases.
How do I confirm the station is regulating correctly after installation?
Watch the 1 31/32 in supply gauge read up to 3,000 psi and the delivery gauge settle within the 1 to 22 psi range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
