Victor
Victor 0781-3632 Gas Regulator CGA-510LP Inlet
Single-stage gas regulator for natural gas or propane cylinders with a CGA-510LP inlet, delivering 5 to 125 psi through a 9/16"-18 LH outlet
- Single-stage design simplifies setup for propane and natural gas
- CGA-510LP inlet connects directly to standard LP cylinders
- Brass body with neoprene diaphragm resists corrosion and wear
- Delivery pressure adjustable from 5 to 125 psi for versatile welding tasks
- Meets ASTM G175, CGA E-4 and UL252 safety standards
Victor 0781-3632 Gas Regulator
The Victor 0781-3632 is a single-stage brass regulator built for natural gas and propane cylinders. It is intended for welders and technicians who need a direct CGA-510LP inlet connection on their supply side.
Build quality and connections
The brass body measures 3.6 in diameter and uses a neoprene diaphragm for reliable sealing. A 9/16 in. -18 M LH outlet threads onto standard torch hoses, while the CGA-510LP nut secures to the cylinder valve without adapters.
Pressure range and gauges
Delivery pressure adjusts from 5 to 125 psi, monitored by a 2 in gauge, while a 400 psi supply gauge shows cylinder contents. Maximum inlet pressure is rated at 350 psi, so the unit must not be used on higher-pressure sources.
Highlights
- Single-stage design simplifies setup for propane and natural gas
- CGA-510LP inlet connects directly to standard LP cylinders
- Brass body with neoprene diaphragm resists corrosion and wear
- Delivery pressure adjustable from 5 to 125 psi for versatile welding tasks
- Meets ASTM G175, CGA E-4 and UL252 safety standards
Specifications
| Brand | VICTOR |
|---|
Questions about this item
What delivery pressure range does the single-stage regulator with CGA-510LP inlet provide?
The single-stage design delivers 5 to 125 psi outlet pressure from a maximum 350 psi inlet, with a 400 psi supply gauge and 2-inch gauge faces.
What outlet thread does the 9/16-18 LH connection on this brass-body regulator mate with?
The 9/16 in.-18 M LH outlet fits standard left-hand torch or hose fittings used for propane and natural gas service.
How do you install the CGA-510LP nut on the cylinder valve without damaging the neoprene diaphragm seat?
Hand-tighten the CGA-510LP nut, then snug 1/4 turn with a wrench; over-torquing crushes the seat and causes leaks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
