Victor
Victor 0381G1621 Straight Cutting Torch 21 in 90° Head Cuts 5 in Welding
Straight cutting torch with a 90° head cuts up to 5 in and measures 21 in long
- MaterialHAWA
- TypeWelding Supplies
- Cuts up to 5 in with compatible tips
- 90° head angle improves access in tight spaces
- 21 in length provides extended reach on the job
- Works with oxygen and all fuel gases when paired with proper tip
- 9/16-18 RH and LH inlet connections fit standard regulators
Straight Cutting Torch for Oxygen and Fuel Gases
The Victor 0381G1621 is a straight cutting torch built for oxygen and compatible fuel gases when fitted with the proper tip. It belongs to the ST900FC series and has a 90 degree head angle. The unit is designed for cutting only and cannot be used for oxy-fuel welding. It suits fabricators and maintenance crews who need a dedicated cutting tool.
Thermals Noise and Power Draw in Normal Use
The torch operates with gases supplied at regulated pressures so heat is concentrated at the cutting tip rather than the body. No electrical power is required and there are no moving parts that generate noise during use. The 21 in length keeps the operator’s hands away from the immediate heat zone while cutting up to 5 in thick material.
Bundled Accessories and Software Impact
The torch uses Victor 1 Series tips and connects via 9/16-18 RH and LH inlets. No tips, regulators or hoses are included so the buyer must supply the correct tip for the chosen fuel gas and material thickness. Selecting the proper tip series directly determines cut quality and maximum thickness capability.
Highlights
- Cuts up to 5 in with compatible tips
- 90° head angle improves access in tight spaces
- 21 in length provides extended reach on the job
- Works with oxygen and all fuel gases when paired with proper tip
- 9/16-18 RH and LH inlet connections fit standard regulators
Specifications
| Brand | Victor |
|---|---|
| Model | 0381G1621 |
| Material | HAWA |
| Type | Welding Supplies |
Questions about this item
How do I install the Victor 0381G1621 torch and what is the common mistake?
Connect the 9/16-18 RH and 9/16-18 LH inlets to oxygen and fuel supplies; the step often missed is confirming the correct Victor 1 Series tip for the gas mix before lighting.
What maintenance or replacement will the 21 in straight cutting torch need later?
Replace Victor 1 Series cutting tips as they wear; inspect the 90° head mixer and inlet connections for leaks or damage during routine service.
What limit appears first when cutting continuously with this torch?
The 5 in maximum cut thickness is the primary limit; sustained heavy preheat can overheat the 90° head faster than the 21 in barrel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
