Vibra-TITE
Vibra-TITE 146 Threadlocker Red .010" Gap 250mL 14625
High-strength red threadlocker fills gaps up to .010" and secures fasteners against vibration and corrosion in a 250mL bottle
- TypeThreadlockers
- High-strength locking prevents vibration loosening on critical fasteners
- Red formula fills gaps up to .010 inches for secure thread engagement
- Heat-applied removal allows disassembly with standard hand tools
- Corrosion protection shields metal threads from rust and environmental damage
- 250 mL bottle supplies ample volume for multiple assembly tasks
High-Strength Threadlocker for Permanent Fastening
Vibra-TITE 146 is a red, high-strength anaerobic adhesive designed to lock and seal threaded fasteners permanently. It fills gaps up to .010 inch and cures between metal surfaces to create a solid, unitized assembly that resists vibration loosening. The 250mL bottle suits maintenance crews and assembly lines securing critical bolts, studs and pipe threads that must not back out under load.
Red Formula Enables Heat-Assisted Removal
The red colour identifies the highest strength grade in the range; once cured, the bond withstands extreme vibration and protects threads from rust and corrosion. Fasteners can still be disassembled using standard hand tools after localised heat is applied to break the anaerobic bond. This characteristic lets technicians service equipment without destroying threads or resorting to mechanical force that damages components.
Anaerobic Cure Limits Use to Metal Threads
The adhesive only polymerises in the absence of air and in the presence of active metal ions, so it will not cure on plastic, plated or non-metallic threads or in large clearance gaps beyond .010 inch. Surfaces must be clean and free of oil for reliable bonding, and the product is not designed for sealing unthreaded joints or filling structural voids. Users needing removable or adjustable fasteners should select a lower-strength grade.
Highlights
- High-strength locking prevents vibration loosening on critical fasteners
- Red formula fills gaps up to .010 inches for secure thread engagement
- Heat-applied removal allows disassembly with standard hand tools
- Corrosion protection shields metal threads from rust and environmental damage
- 250 mL bottle supplies ample volume for multiple assembly tasks
Specifications
| Type | Threadlockers |
|---|---|
| Brand | Vibra-tite |
Questions about this item
Will the cured red threadlocker need reapplication after repeated disassembly cycles?
The compound forms a permanent bond that requires heat for removal; once heated and the fastener is taken apart, the old adhesive must be cleaned off and fresh threadlocker applied for the next assembly.
What is the maximum thread gap this red threadlocker can reliably fill?
It is rated for gaps up to .010 inches, so larger clearances will exceed its filling capability and may compromise locking strength.
Does the 250 mL bottle generate noticeable fumes or heat during continuous application?
The anaerobic formula cures only in the absence of air between metal threads, so it does not exotherm or release strong vapours during normal all-day use in a ventilated area.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
