Vibra-TITE
Vibra-TITE 140 Series High-Strength Threadlocker Red 250mL 14025
High-strength red threadlocker fills gaps and prevents fastener loosening from vibration in a 250 mL bottle
- TypeThreadlockers
- Color/FinishRed
- High-strength threadlocking for permanent assemblies
- Red liquid formula fills thread gaps completely
- 500 cP viscosity ensures even coverage
- 250 mL bottle suits high-volume applications
- Heat-applied removal allows fastener reuse
High-Strength Red Threadlocker 250mL
Vibra-TITE 140 Series threadlocker is a red, high-strength anaerobic adhesive supplied in a 250mL bottle. It fills the gaps between engaged threads to create a solid, unitized assembly that resists loosening from vibration. The formulation also protects the fastened joint against rust and corrosion. Fasteners remain removable with hand tools after localized heat is applied.
Permanent-Fastener Assembly and Maintenance
This threadlocker suits technicians and mechanics who need a permanent-strength bond on bolts, studs and pipe fittings that must not back out under severe vibration. It is not intended for fasteners that require frequent adjustment or disassembly without heat equipment. Low-strength or medium-strength grades should be chosen when regular hand-tool removal is expected. The 500 cP viscosity works best where thread clearances are within the range this grade is designed for.
Red High-Strength Grade and 250mL Volume
The red colour identifies the high-strength grade, distinguishing it from lower-strength variants in the same series. Viscosity is rated at 500 cP, which governs gap-filling capability and flow into engaged threads. The 250mL bottle size determines the total volume available for production-line or workshop use. Matching these three specifications to the joint design confirms whether this is the correct threadlocker for the application.
Highlights
- High-strength threadlocking for permanent assemblies
- Red liquid formula fills thread gaps completely
- 500 cP viscosity ensures even coverage
- 250 mL bottle suits high-volume applications
- Heat-applied removal allows fastener reuse
Specifications
| Type | Threadlockers |
|---|---|
| Color/Finish | Red |
| Brand | Vibra-tite |
Questions about this item
Does the 500 cP viscosity of the 140 Series Red threadlocker change after the bottle has been open for weeks?
The anaerobic formula remains liquid inside the sealed bottle and only cures when confined between metal threads, so shelf viscosity stays consistent.
What thread size and material are required for the 14025 high-strength threadlocker to cure properly?
It cures on standard metal fasteners with a thread engagement that excludes air; no primer is needed for most steel or iron assemblies.
Can the red 140 Series compound be used on the same bolts previously secured with a blue medium-strength threadlocker?
Yes, after the old compound is fully cleaned from the threads, the red 14025 formula will bond and lock the fasteners as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
