Viair Corporation
Viair Corporation 92805 36" SS Braided Leader Hose w/ Check Valve
A 36 inch stainless-steel braided leader hose with an integrated check valve and 1/4 inch NPT male fittings on both ends
- 36-inch stainless steel braided hose resists abrasion and kinking
- Integrated check valve prevents back-flow and protects compressor
- 1/4-inch NPT male threads on both ends fit standard fittings
- California Proposition 65 warning — contains chemicals linked to cancer and reproductive harm
- Brand-new Viair part number 92805 ready for immediate installation
Product Identity
The Viair 92805 is a 36 inch stainless steel braided leader hose fitted with an integrated check valve and 1/4 inch male NPT threads on both ends. It is designed for air compressor systems that need a flexible, high pressure connection between the compressor outlet and the air tank or distribution manifold.
Interface Limits
The hose uses 1/4 inch male NPT threads which seal on tapered pipe threads and require thread sealant or tape for a leak free joint. The stainless steel braid resists abrasion and heat but the 1/4 inch bore restricts maximum airflow compared to larger diameter leader hoses used on higher volume compressors.
Compatibility Check
Verify that both connection points on your compressor and tank accept 1/4 inch male NPT fittings before ordering. Confirm the system operating pressure does not exceed the hose rated pressure and ensure there is enough straight length to route the 36 inch hose without sharp bends that could damage the braid.
Highlights
- 36-inch stainless steel braided hose resists abrasion and kinking
- Integrated check valve prevents back-flow and protects compressor
- 1/4-inch NPT male threads on both ends fit standard fittings
- California Proposition 65 warning — contains chemicals linked to cancer and reproductive harm
- Brand-new Viair part number 92805 ready for immediate installation
Specifications
| Brand | VIAIR |
|---|
Questions about this item
Is the 36 inch length right for my compressor placement?
The hose is 36 inches long with 1/4 inch male NPT fittings on both ends, so measure the gap between your tank port and compressor head to confirm reach.
What does the stainless braid do for daily shop use?
The stainless steel braid resists abrasion, heat and kinking better than bare rubber, giving a durable connection between tank and compressor.
How does the built in check valve affect air flow?
The integrated check valve allows air to flow from compressor to tank while preventing backflow, so the tank holds pressure when the compressor stops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
