VEVOR
VEVOR ZX30056 Utility Pump 1/3 HP 2450 GPH 30 ft Head IPX8 Submersible
Submersible utility pump moves up to 2450 GPH with a 30 ft head, IPX8 waterproof rating, and includes a 10 ft power cord plus garden-hose adapter
- TypeOther Appliances
- Width7.87
- Pumps 2450 GPH for fast water removal
- Lifts water 30 ft with 1/3 HP motor
- IPX8 rating allows continuous submersion
- 10 ft cord reaches distant outlets easily
- 1-1/4" NPT outlet plus 3/4" hose adapter included
Submersible Utility Pump for Drainage Tasks
The VEVOR ZX30056 is a 1/3 HP submersible utility pump built for residential water removal. It suits homeowners draining swimming pools, garden ponds, or flooded basements. The IPX8 waterproof rating allows continuous underwater operation. A 10 ft power cord provides placement flexibility around the yard.
Thermal Protection and Electrical Draw
A built-in overload protection switch safeguards the copper-wire motor during extended pumping sessions. The unit draws 250 W at maximum load, running on standard household current. Submersion in water provides constant cooling for the motor housing. No external lubrication or cooling systems are required for normal use.
1-1/4 Inch Outlet with Garden Hose Adapter
The pump features an NPT 1-1/4 inch discharge port and includes a 3/4 inch garden hose adapter for common hose connections. At 7.72 lbs, it is portable enough for temporary placement on flat surfaces. The 5.98 x 5.35 x 8.66 in footprint fits inside standard sump basins. Buyers needing higher head pressure or larger discharge diameters should consider other models.
Highlights
- Pumps 2450 GPH for fast water removal
- Lifts water 30 ft with 1/3 HP motor
- IPX8 rating allows continuous submersion
- 10 ft cord reaches distant outlets easily
- 1-1/4" NPT outlet plus 3/4" hose adapter included
Specifications
| Type | Other Appliances |
|---|---|
| Width | 7.87 |
Questions about this item
How do I install the 1-1/4" NPT outlet and 3/4" garden hose adapter correctly?
Thread the 3/4" garden hose adapter onto the 1-1/4" NPT discharge outlet by hand, then tighten with pliers just enough to seal — overtightening cracks the plastic threads, which is the most common install error.
Which part will need replacement first during long-term submersible use?
The 250 W copper-wire motor’s built-in overload protector is the first wear item; it resets automatically but degrades after repeated thermal trips, so plan to replace the pump when reset cycles become frequent.
At what head height does the 2450 GPH flow rate drop off under continuous operation?
The 2450 GPH rating is at zero head; flow declines steadily as lift increases and reaches zero at the 30 ft / 9.1 m maximum head, so sustained use near that height delivers minimal output.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
