VEVOR
VEVOR YSBLJ01 4 PCS 180° Glass Clamp 8-12 mm 304 Stainless Steel Specialty Appliance
Four stainless-steel clamps secure 8 mm, 10 mm or 12 mm tempered glass at 180° with included rubber pads and hex wrench
- TypeOther Appliances
- Width4.57
- Rust-resistant outdoor durability from SUS304 stainless steel construction
- Tool-free setup with included hex wrench for fast mounting
- Adjustable fit for 8 mm, 10 mm or 12 mm glass using supplied rubber pads
- Bi-directional 180° design allows installation on any glass side
- High-hardness 304 steel screws minimise vibration in strong winds
Four-piece 180° glass clamp kit
This set contains four rectangle brackets made from SUS304 stainless steel for securing 8 mm to 12 mm tempered glass. It suits balcony railings, garden screens, pool fences and stair balustrades where a frameless look is required.
Bi-directional mounting with adjustable pads
Each clamp offers a 1.17" slot depth, 0.57" slot width and 0.2" wall thickness, allowing installation on either side of the glass. Sixteen rubber pads per thickness (8 mm, 10 mm, 12 mm) are supplied so the fit can be matched to the pane on site.
Clamps 8 mm to 12 mm glass with 304 steel
The brackets accept glass from 0.31" to 0.47" thick and are built entirely from 304 stainless steel for corrosion resistance outdoors. Buyers needing to secure thinner or thicker panes, or a different alloy, should look elsewhere.
Highlights
- Rust-resistant outdoor durability from SUS304 stainless steel construction
- Tool-free setup with included hex wrench for fast mounting
- Adjustable fit for 8 mm, 10 mm or 12 mm glass using supplied rubber pads
- Bi-directional 180° design allows installation on any glass side
- High-hardness 304 steel screws minimise vibration in strong winds
Specifications
| Type | Other Appliances |
|---|---|
| Width | 4.57 |
Questions about this item
What glass thicknesses does the 180° clamp's 0.57" wide slot accept?
The slot fits 8 mm, 10 mm and 12 mm tempered glass using the three supplied rubber-pad sets; wall thickness is 0.2".
What are the clamp's overall dimensions and hole spacing for mounting?
Each bracket measures 100 x 50 x 24.5 mm (3.94 x 1.97 x 0.96"); mounting holes follow that 100 x 50 mm footprint.
How is the clamp installed and what step is often missed?
Loosen bolts with the included hex wrench, choose the correct rubber pads for your glass thickness, insert glass into the 1.17" deep slot, then tighten evenly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013206BTC
In stock