We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Steel welding hose reel with hand crank and lead-in hose, wall-mount frame

VEVOR

VEVOR WHRMS02 Welding Hose Reel Steel 14.6x10.6x12.9in 10.5lb

SKU CH-A81C-1S6YQ

Holds oxygen and acetylene hose on a steel reel with a 3 ft lead-in and 9/16"-18 B fittings, mounts on ceiling or wall and includes a tension brake plus hand crank for controlled retraction

  • TypeOther Appliances
  • Width12.2
  • Secure gas delivery with 3 ft lead-in hose and 9/16"-18 B fittings
  • Durable steel frame resists impact and corrosion for long workshop life
  • Adjustable tension brake stops free-spinning during use or transport
  • Manual hand crank enables effortless hose retraction without power
  • Ceiling or wall mount keeps hoses tangle-free in garages and tool rooms

VEVOR WHRMS02 Steel Hose Reel

The VEVOR WHRMS02 is a hand-crank welding hose reel built from heavy-duty steel for ceiling or wall mounting. It arrives with a 3 ft R-Grade lead-in hose and 9/16"-18 B fittings for oxygen and acetylene supply. The unit weighs 10.5 lb and measures 14.6 x 10.6 x 12.9 in, featuring a tension brake to stop free-spinning during use.

For Workshops Needing Organised Gas Lines

This reel suits fabrication shops and garages that want oxygen and acetylene hoses secured off the floor and protected from kinks. The manual crank and brake give the operator full control over deployment and retraction. It is not intended for buyers who need a powered retraction system or a unit rated for fuel gases other than oxygen and acetylene.

3 ft R-Grade Lead-In Hose With B Fittings

The included 3 ft lead-in hose uses R-Grade construction and terminates in 9/16"-18 left-hand and right-hand B fittings. This specific connection determines whether the reel mates directly with your existing welding equipment. Verify your torch and regulator fitting type before purchase.

Highlights

  • Secure gas delivery with 3 ft lead-in hose and 9/16"-18 B fittings
  • Durable steel frame resists impact and corrosion for long workshop life
  • Adjustable tension brake stops free-spinning during use or transport
  • Manual hand crank enables effortless hose retraction without power
  • Ceiling or wall mount keeps hoses tangle-free in garages and tool rooms

Specifications

TypeOther Appliances
Width12.2

Questions about this item

How do I mount the 14.6 x 10.6 x 12.9 inch steel reel to a ceiling or wall, and what step is often missed?

Bolt the U-shaped frame through its mounting holes into solid studs or concrete anchors, then attach the 3 ft lead-in hose with its 9/16"-18 LH and RH B fittings before cranking — skipping the hose connection first is the common error.

What part of this reel will need maintenance or replacement after extended workshop use?

The hand-crank arm and tension brake should be inspected periodically; lubricate the crank pivot and check the brake pad for wear, while the 3 ft R-grade lead-in hose may need replacement if it develops cracks or fitting leaks.

What limit appears first when the reel is used continuously for oxygen and acetylene welding?

The fixed 3 ft lead-in hose length restricts how far the supply can sit from the work area, and the manual crank rewind speed becomes the practical bottleneck during long, repeated pull-out cycles.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.