VEVOR
VEVOR WB-4503 Self-Adhesive Vinyl Floor Tiles 12x12 inch 50pcs 1.5mm White Marble
Self-adhesive vinyl tiles cover 50 square feet with a 1.5 mm white marble finish
- TypeOther Appliances
- Width12.8
- Peel-and-stick backing enables quick installation without adhesive
- 50 tiles cover 50 square feet of floor space
- 5 mm thickness adds comfort underfoot
- 1 mm wear layer resists daily scuffs
- White marble pattern suits kitchen, bathroom and bedroom décor
Product Identity
VEVOR WB-4503 vinyl floor tiles come in a 50-piece box covering 50²feet. Each tile measures 12'' by 12'' with a 1.5mm profile and a 0.1mm wear layer. The white marble pattern suits DIY updates in kitchens, dining rooms, bedrooms or bathrooms.
Sustained Use
The 0.1mm wear layer resists daily foot traffic and routine cleaning without rapid surface loss. Vinyl construction tolerates moisture exposure in bathrooms and kitchens while maintaining adhesion over time. The 1.5mm thickness provides stable underfoot feel across the full coverage area.
Build and Installation
Self-adhesive backing allows direct peel-and-stick application on prepared subfloors without extra glue. Tiles weigh 32lbs total, making the box manageable for transport and positioning. Square 305mm edges simplify alignment and pattern matching during layout.
Highlights
- Peel-and-stick backing enables quick installation without adhesive
- 50 tiles cover 50 square feet of floor space
- 5 mm thickness adds comfort underfoot
- 1 mm wear layer resists daily scuffs
- White marble pattern suits kitchen, bathroom and bedroom décor
Specifications
| Type | Other Appliances |
|---|---|
| Width | 12.8 |
Questions about this item
How much heat does the adhesive generate when the tiles are left down all day?
The vinyl tiles themselves produce no heat; they are passive flooring with a 1.5 mm thickness and a 0.1 mm wear layer.
What subfloor condition must I already have for the peel-and-stick backing to bond?
A clean, dry, flat surface free of dust, grease or loose paint is required for the adhesive on each 12 x 12 inch tile to grip.
Will the 1.5 mm tiles sit flush against my existing 3 mm vinyl sheet without a transition strip?
The height difference is 1.5 mm, so a small step remains; a reducer strip is recommended for a smooth join.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



