We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey steel frame watercraft dolly with four five-inch nylon wheels two braked twenty-two inch fixed bunk spacing

VEVOR

VEVOR Watercraft Dolly 1800 lbs 22 in Bunk 4 Casters 2 Brakes

SKU CH-RMMB-J2CE6

Moves watercraft up to 1800 lbs on a fixed 22 in bunk with four 5 in nylon wheels and two brakes

  • TypeOther Appliances
  • Width15.35
  • Supports up to 1800 lbs with thickened steel tube and I-beam base
  • 22-inch fixed bunk spacing welded for stability during transport
  • Four 5-inch nylon wheels with carbon-steel brackets and ball bearings
  • Two swivel casters include brakes to lock the dolly in place
  • Assembly hardware and manual included for quick setup

High-Capacity Watercraft Dolly

The VEVOR watercraft dolly is a steel-framed cart rated for 1800 lbs load capacity with a fixed 22 in bunk spacing. It uses a 1.4 in thickened tube diameter and I-beam base for structural rigidity. Four 5 in nylon wheels with carbon steel brackets and ball bearings provide mobility. Two wheels include brakes for locking during trailer connection. The unit weighs 58 lbs and measures 52 x 33 x 20 in overall.

Included Hardware and Assembly

The package supplies all installation hardware: 2 bottom rods, 2 bottom connecting rods, 4 vertical support rods, 4 wheels, 28 M10 flat washers, 28 M10 lock nuts, 8 hex bolts M10x70, 16 hex bolts M10x20, 4 hex bolts M10x80, and 2 open-end wrenches 14-17. An instruction manual guides the assembly process. The complete kit allows the dolly to be built without sourcing additional fasteners or tools.

Suitability and Limits

This dolly suits owners of mid-to-large watercraft such as jet skis, kayaks, hovercrafts, or speedboats needing a fixed 22 in bunk width and 20 in bunk height. The 6 in ground clearance limits use on very rough or soft terrain. Buyers requiring adjustable bunk spacing or higher ground clearance for uneven launch sites should look at other solutions. The 15.35 in width dimension may not fit all storage spaces.

Highlights

  • Supports up to 1800 lbs with thickened steel tube and I-beam base
  • 22-inch fixed bunk spacing welded for stability during transport
  • Four 5-inch nylon wheels with carbon-steel brackets and ball bearings
  • Two swivel casters include brakes to lock the dolly in place
  • Assembly hardware and manual included for quick setup

Specifications

TypeOther Appliances
Width15.35

Questions about this item

Will the nylon wheels and carbon-steel brackets need periodic greasing or replacement?

The 125 mm nylon wheels run on sealed ball bearings inside carbon-steel brackets; no grease points are fitted, so only visual wear checks are required.

What stops the dolly from rolling when a 1800 lb craft is parked on a slope?

Two of the four 125 mm swivel casters have integrated brakes that lock both wheel rotation and swivel action when engaged.

How hot do the wheels or frame get after moving a heavy boat all day?

Nylon wheels and powder-coated steel frame stay at ambient temperature; no motor or friction brake generates heat during manual operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.