VEVOR
VEVOR Wall-Mounted Hose Reel 150 ft 5/8 in 304 Stainless Steel
Wall-mounted stainless-steel reel stores 150 ft of 5/8 in hose with a 5 ft lead hose and nylon guide to prevent tangling
- TypeOther Appliances
- Holds 150 ft of 5/8 in hose with 5 ft lead hose included
- 304 stainless steel construction resists corrosion and rust in all weather
- Nylon hose guide prevents wear and tangling during retraction
- Wall-mounted bracket with anti-loosening screws saves floor space in garage or yard
- Copper-plated brass fittings provide durable leak-resistant connections
High-Capacity Wall-Mounted Hose Reel
This wall-mounted reel stores up to 150 ft of 5/8 in hose and includes a 5 ft lead hose, making it suitable for garden watering or car washing. The unit mounts securely to a wall using the supplied stainless steel bracket and anti-loosening screws.
Corrosion-Resistant 304 Stainless Steel Construction
The reel body and mounting bracket are made from 304 stainless steel, which resists rust and corrosion in sun, rain, or cold winter conditions. A nylon hose guide prevents wear and tangling during frequent retraction cycles.
Installation Hardware and Common Issues
The package provides four M12×80 mm expansion screws, a stainless steel hose saddle, a cross inner hex wrench, handle, and assorted stainless screws with a rubber washer. Installers must ensure the mounting surface can accept expansion anchors and that the 17.32 in clearance fits the chosen location.
Highlights
- Holds 150 ft of 5/8 in hose with 5 ft lead hose included
- 304 stainless steel construction resists corrosion and rust in all weather
- Nylon hose guide prevents wear and tangling during retraction
- Wall-mounted bracket with anti-loosening screws saves floor space in garage or yard
- Copper-plated brass fittings provide durable leak-resistant connections
Specifications
| Type | Other Appliances |
|---|
Questions about this item
How much force is needed to crank the reel after a full day of use in the sun?
The manual reel uses a stainless-steel handle; effort depends on hose length and water pressure, not on heat expansion of the 304 stainless frame.
What mounting surface and tools are required to install the included bracket?
The kit supplies four M12×80 mm expansion screws for concrete or masonry; you need a drill with a 12 mm bit and a wrench for the M8 and M6 fasteners.
Will the brass inlet fitting connect to my older 3/4-inch garden tap without leaks?
The reel has copper-plated fittings sized for standard 5/8-inch hose; a 3/4-inch tap needs a separate reducer washer, not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
