We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PEX-B tubing coil, 1.125 inch OD, 500 ft length, includes cutter and clamps

VEVOR

VEVOR VV-PEX1IN-W PEX-B Tubing 1.125" OD 500 ft

SKU CH-GDYV-K67W3 MPN VV-PEX1IN-W

White PEX-B tubing, 1.125" OD, 500 ft coil with cutter and clamps for potable water and radiant heating

  • TypeOther Appliances
  • Width12.99
  • 500 ft coil covers large plumbing runs without splices
  • 125 in outer diameter fits standard 1 in PEX fittings
  • 7 in minimum bend radius allows tight corners without kinking
  • Freeze-resistant to -40 °F for year-round cold-water supply
  • Includes cutter and five clamps for immediate installation

PEX-B Tubing for Potable Water & Radiant Heat

This 500 ft coil of PEX-B tubing has a 1.125 inch outer diameter and a 7/8 inch inner diameter. It is rated for potable water systems and radiant floor heating projects. The non-oxygen-barrier material is non-toxic and designed for maintenance-free cold water flow.

Temperature Range & Pressure Ratings

The tubing operates from -40 to 203 degrees Fahrenheit and is freeze-proof, expanding and contracting with temperature changes. Pressure ratings are 160 psi at 73 degrees, 100 psi at 180 degrees and 80 psi at 200 degrees. A minimum 7 inch bending radius prevents cracking during installation.

Cutter & Clamps Included

The package supplies one cutter and five clamps so the tubing can be cut to length and secured immediately. No additional tools are required to start the job. The coil weighs 12.99 units and measures 152.4 metres in total length.

Highlights

  • 500 ft coil covers large plumbing runs without splices
  • 125 in outer diameter fits standard 1 in PEX fittings
  • 7 in minimum bend radius allows tight corners without kinking
  • Freeze-resistant to -40 °F for year-round cold-water supply
  • Includes cutter and five clamps for immediate installation

Specifications

TypeOther Appliances
Width12.99

Questions about this item

How do I install the 1.125" OD PEX-B tubing with the included clamps and cutter?

Cut the tubing square with the supplied cutter, slide a clamp over the end, push the fitting fully onto the 7/8" ID bore, then crimp the clamp over the 0.07" wall using a PEX crimp tool; the 7" minimum bend radius prevents kinks during routing.

What maintenance or replacement will the non-oxygen-barrier PEX-B tubing need over time?

The tubing itself is maintenance-free; inspect the five supplied clamps periodically for corrosion or loosening and replace any that show wear to maintain the 160 psi at 73°F pressure rating.

At what temperature does the pressure limit of the PEX-B tubing drop to 80 psi during sustained hot-water use?

The pressure rating falls to 80 psi at 200°F, so sustained radiant-heating loops above that temperature exceed the tubing's rated limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.