We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver magnetic drill press with rectangular base, vertical motor housing, three crank handles and coolant tank attached

VEVOR

VEVOR VV-MD-US12 Magnetic Drill 1100W 1.57" 12000N 580 RPM 12 Bits

SKU CH-9189-A6WP4 MPN VV-MD-US12

Portable 1100 W magnetic drill press bores up to 1.57" in steel with 12000 N holding force and includes 12 bits

  • TypeOther Appliances
  • Width18.5
  • 1100 W motor drills steel up to 1.57" diameter at 580 RPM
  • 12000 N magnetic force locks the base securely on ferrous surfaces
  • 11 coring bits plus 1 twist bit cover hole sizes from 0.47" to 1.1
  • 90" stroke and 2.17" max depth handle thick workpieces
  • 25 lb portable unit with ergonomic handle and three crank handles

Portable Magnetic Drill Press

The VEVOR VV-MD-US12 is a 1100W electromagnetic drill press designed for steel fabrication and on-site metalwork. Its 12000N magnetic base clamps to flat ferrous surfaces, letting operators bore accurate holes without a fixed workshop bench. The unit runs on 110V mains power and weighs 24.25 lb for transport between job sites.

Included Bits and Coolant System

Eleven annular coring cutters from 12 mm to 27 mm and one 10 mm twist drill cover the most common hole sizes in structural steel. A coolant tank mounts on the 150 mm stroke to flood the cut, extending tool life and clearing swarf. The supplied chuck and 6.34 mm thimble adapt the arbor for both cutter types without extra tooling.

Build Quality and Daily Use

The base measures 166 x 80 x 50 mm and uses near-pure iron for consistent holding force on clean, flat plate. Three extended crank handles give mechanical advantage when feeding the 580 rpm spindle through material up to 55 mm deep. An ergonomic carry handle and a safety rope aid positioning on vertical or overhead surfaces. Buyers needing to drill non-magnetic metals or composite materials will require a different clamping method.

Highlights

  • 1100 W motor drills steel up to 1.57" diameter at 580 RPM
  • 12000 N magnetic force locks the base securely on ferrous surfaces
  • 11 coring bits plus 1 twist bit cover hole sizes from 0.47" to 1.1
  • 90" stroke and 2.17" max depth handle thick workpieces
  • 25 lb portable unit with ergonomic handle and three crank handles

Specifications

TypeOther Appliances
Width18.5

Questions about this item

How often will the 12 included coring and twist bits need replacing when drilling 40 mm holes in steel?

The 11 coring bits (12–27 mm) and one 10 mm twist bit are consumables; replacement frequency depends on steel hardness, feed pressure and coolant use, so no fixed interval can be given.

What limits continuous operation of the 1100 W motor at 580 RPM?

Motor temperature is the limiting factor; the unit has a cooling system but no duty-cycle rating is published, so allow cool-down periods during extended drilling.

How much heat and noise does the 12 000 N electromagnetic base produce during all-day use?

The electromagnetic base draws 10 A at 110 V and will warm up during continuous operation; audible noise comes from the motor and gearbox at 580 RPM.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.