VEVOR
VEVOR VV-GYGFS-HS6YC 6FT Carbon Steel Handrail Kit 440lbs 2pcs
A 6 ft carbon-steel handrail kit with two 35.4 in pipes and three wall mounts, rated at 440 lbs per bracket for indoor or outdoor stair safety
- TypeOther Appliances
- Supports 440 lbs per bracket for safe stair use
- Carbon steel with matte black finish resists rust and corrosion
- Pre-drilled 6 mm holes enable fast wall mounting
- Two 90 cm pipes give 1.8 m total handrail length
- Includes 12 expansion screws and 12 wood screws for installation
Secure Stair Handrail Kit
The VEVOR VV-GYGFS-HS6YC kit provides two carbon steel handrails with a combined length of 6 FT. Each rail supports a load capacity of 440lbs, offering stable assistance for children, the elderly, pregnant women, and anyone with limited mobility on indoor or outdoor staircases.
Straightforward Wall Mounting
Installation uses three wall mount supports per kit with a stand-off width of 3.74 inches. Pre-drilled holes measure 0.23 inches in diameter, and the package includes 12 expansion screws and 12 wood screws. Builders must verify that the mounting substrate can accept the supplied fasteners and bear the rated load.
Matte Black Carbon Steel Finish
The 1.26-inch diameter pipes feature a 0.06-inch wall thickness and a matte black coating rated for 100m outdoor exposure. This finish resists rust and corrosion across seasons. The kit is not suited for applications requiring longer continuous runs, higher per-bracket ratings, or non-standard mounting angles.
Highlights
- Supports 440 lbs per bracket for safe stair use
- Carbon steel with matte black finish resists rust and corrosion
- Pre-drilled 6 mm holes enable fast wall mounting
- Two 90 cm pipes give 1.8 m total handrail length
- Includes 12 expansion screws and 12 wood screws for installation
Specifications
| Type | Other Appliances |
|---|
Questions about this item
How do I confirm the handrail is holding its rated 440lbs after I install it?
Apply steady downward pressure on the centre of each 35.4 in pipe; the carbon steel tube with 1.5 mm wall thickness should not flex or creak, and all three wall mount supports must remain flush to the wall.
What components arrive in the box and which fasteners must I supply myself?
The package includes two handrails, three wall mount supports, twelve 6*30 expansion screws and twelve 3.5*35 screws — no extra hardware is required for standard masonry or wood stud mounting.
Should I choose the 6 ft kit or a longer version for a 1.8 m staircase?
This model provides exactly 1.8 m total length from two 90 cm pipes; if your stair run matches that dimension, select this kit, otherwise measure the run and pick a kit whose total length equals or slightly exceeds it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
