VEVOR
VEVOR VV-FXZGFJ1450 Floor Blower 1/4 HP 1000 CFM 115 V ETL
Portable floor blower delivers 600, 800 or 1000 CFM airflow at 115 V with four adjustable angles and ETL certification
- TypeOther
- ETL listed for verified electrical safety
- 1/4 hp motor delivers 600 to 1000 CFM airflow
- Four blowing angles from 0 to 90 degrees
- Lightweight 4.2 kg frame with 10 ft cord
- Built-in timer supports timed drying cycles
VEVOR 1/4 HP Floor Blower for Drying
The VEVOR VV-FXZGFJ1450 moves air at 600, 800 or 1000 CFM from a 1/4 hp motor running on 115 V. It suits janitorial crews, homeowners and commercial sites that need fast carpet drying or spot cooling. The unit weighs 9.3 lbs and includes a 10 ft power cord.
Three-Speed Airflow Limits for 115 V Circuits
Maximum output reaches 1000 CFM at 1500 RPM on the highest setting. The 115 V 60 Hz supply caps continuous draw, so extended runs at top speed suit standard household circuits but not loads already near the breaker limit. Lower speeds reduce flow to 800 or 600 CFM for quieter operation.
Four-Position Angle Adjustment and Setup Notes
The blower tilts to 0°, 20°, 45° or 90° without tools; simply lift and lock the frame. The polypropylene housing resists cracking but can slide on polished floors if not braced. ETL listing confirms compliance with North American safety standards for indoor use.
Highlights
- ETL listed for verified electrical safety
- 1/4 hp motor delivers 600 to 1000 CFM airflow
- Four blowing angles from 0 to 90 degrees
- Lightweight 4.2 kg frame with 10 ft cord
- Built-in timer supports timed drying cycles
Specifications
| Type | Other |
|---|
Questions about this item
Should I run the blower at 600, 800 or 1000 CFM for carpet drying?
Start at 600 CFM for light moisture, step up to 800 CFM for soaked carpet and use 1000 CFM only when maximum airflow is needed; each speed draws the same 1/4 hp at 115 V.
What does the 1000 CFM rating mean once the blower is running on a job site?
At top speed the unit moves 1000 cubic feet of air per minute at 1500 RPM, giving fast surface drying across a 10 ft power-cord radius.
Is the ETL listing on this 115 V blower enough for commercial janitorial use?
Yes, the ETL mark confirms the 1/4 hp motor meets North American safety standards for continuous 115 V operation in commercial environments.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
