We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of 48 inch zinc plated steel drawer slides with ball bearings

VEVOR

VEVOR VV-CTDG-500B Specialty Appliance 48" 500lb Ball Bearing Soft Close Drawer Slide

SKU CH-8ZBH-XP3VX MPN VV-CTDG-500B

Heavy-duty 48-inch ball-bearing slides extend 96 inches and support 500 lb with soft-close action

  • TypeAccessory
  • Full drawer access with 96 inch pull-out length
  • Supports heavy loads up to 500 lbs or 225 kg
  • Smooth quiet operation from ball bearing mechanism
  • Corrosion resistant zinc plated cold rolled steel
  • Includes 12 M6 screws and nuts for installation

48-Inch Full-Extension Drawer Slide Pair

This pair of 48-inch ball-bearing slides provides full extension so the drawer travels the complete 96-inch pull-out length. Each slide is built from cold-rolled steel with a zinc-plated finish and rated for a 500 lb load capacity. The set includes two slides plus twelve M6 screws and twelve M6 nuts for installation.

Smooth Soft-Close Action in Daily Use

The integrated soft-close mechanism draws the drawer shut gently without slamming, keeping operation quiet in normal kitchen or workshop environments. Ball-bearing rollers reduce friction so the slide moves freely under typical loads. The zinc-plated steel resists corrosion during everyday exposure to moisture and cleaning agents.

Consistent Performance Under Sustained Heavy Load

Rated at 500 lbs per pair, the slides maintain full extension and soft-close function even when the drawer remains fully loaded for extended periods. Cold-rolled steel construction resists deformation during continuous heavy use. The 121.92 cm folded length fits standard cabinet depths while delivering the full 243.84 cm travel distance.

Highlights

  • Full drawer access with 96 inch pull-out length
  • Supports heavy loads up to 500 lbs or 225 kg
  • Smooth quiet operation from ball bearing mechanism
  • Corrosion resistant zinc plated cold rolled steel
  • Includes 12 M6 screws and nuts for installation

Specifications

TypeAccessory

Questions about this item

How do I install the VV-CTDG-500B slides and what step is often missed?

Mount the outer 48 x 3 inch member to the cabinet and the inner 48 x 1.2 inch member to the drawer using the supplied 12 M6 screws and nuts; the step often missed is aligning the middle 48 x 2.1 inch member so the ball bearings track straight for the full 96 inch extension.

What maintenance or replacement will the VV-CTDG-500B slides need later?

Periodically wipe the cold rolled steel zinc plated rails and ball bearings clean of dust, then apply a light PTFE lubricant; if the soft close damper loses its 500 lb damping force, replace the complete 48 inch slide pair.

What limit appears first on the VV-CTDG-500B slides under sustained heavy use?

The 500 lb load capacity is the first limit; exceeding 225 kg per pair will overwhelm the ball bearings and soft close mechanism, causing premature wear on the 48 inch cold rolled steel members.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.