We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red hydraulic long ram jack with flat base and pump handle

VEVOR

VEVOR VV-CGQJD-HODP-4T Hydraulic Long Ram Jack 4 Ton 24-43.7 in Lift specialty appliance

SKU CH-K62S-2FMJ2 MPN VV-CGQJD-HODP-4T

Lifts loads up to 8818 lbs from 24 to 43.7 inches with a 19.7-inch stroke hydraulic cylinder

  • TypeOther
  • Lifts up to 8818 lbs with 4-ton hydraulic power
  • Extends from 24 in to 43.7 in for versatile reach
  • 7 in stroke provides long travel per pump cycle
  • Flat 2.4 x 2.4 in base keeps the jack stable under load
  • Weighs only 17.6 lb for easy positioning in the shop

4 Ton Hydraulic Long Ram Jack

The VEVOR VV-CGQJD-HODP-4T is a hydraulic long ram jack rated for 4 tons or 8818 lbs. It provides a lifting range from 24 in to 43.7 in with a stroke of 19.7 in. A single piston pump and flat base form the manual lifting mechanism. The unit weighs 17.6 lb.

Suits garage and shop crane tasks needing extended

This jack fits engine lift hoists and cherry picker applications where a long stroke is required. It is not for buyers who need a powered pump or a higher load rating than 4 tons. It is also not for users who require a lifting range starting below 24 in or exceeding 43.7 in.

Manual pump with flat base installs on compatible

The single piston pump operates by hand and the flat base sits on the crane saddle. The piston rod diameter is 1.1 in and the pinhole diameter is .7 in. Common issues include air in the hydraulic cylinder causing spongy lift and the base shifting if the mounting surface is not level.

Highlights

  • Lifts up to 8818 lbs with 4-ton hydraulic power
  • Extends from 24 in to 43.7 in for versatile reach
  • 7 in stroke provides long travel per pump cycle
  • Flat 2.4 x 2.4 in base keeps the jack stable under load
  • Weighs only 17.6 lb for easy positioning in the shop

Specifications

TypeOther

Questions about this item

What crane or cherry picker frame do I need to mount this 4-ton hydraulic ram jack onto?

The jack has a 0.7 in pinhole and a 2.4 x 2.4 in flat base, so your crane or cherry picker must accept that pin diameter and provide a stable mounting surface for the base.

Will the 24 in minimum lift height clear the engine or load on my existing shop crane without extra blocking?

The ram starts at 24 in and extends to 43.7 in with a 19.7 in stroke, so measure your crane’s boom height and load clearance to confirm the 24 in closed height fits before adding any blocks.

How can I verify the jack is delivering its full 8818 lbs capacity after installation?

Apply a known test load up to 8818 lbs and confirm the piston rod reaches the full 43.7 in max height without drifting down, indicating the single piston pump and cylinder are holding pressure correctly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.