We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact air hydraulic pump with oil reservoir and wired remote control

VEVOR

VEVOR TL-A5121 Air Hydraulic Pump 10000 PSI 0.61 Gal Remote Control

SKU CH-W7VF-JFXS5

Delivers up to 10,000 PSI hydraulic pressure with a 0.61 gal factory-filled reservoir and includes a 9.84 ft remote for safer operation

  • TypeOther Appliances
  • Width9.65
  • Delivers 10000 PSI for heavy lifting and pressing tasks
  • 3 m remote keeps operator clear of hazards
  • Factory-filled 2.3 L reservoir cuts setup time
  • NPT 1/4 in air inlet and NPT 3/8 in oil outlet fit standard fittings
  • Runs on 110 to 145 PSI shop air supply

High-Pressure Air Hydraulic Pump

The VEVOR TL-A5121 delivers up to 10000 PSI hydraulic pressure using 110 to 145 PSI input air. It suits workshops needing portable power for lifting, pressing, bending, straightening, cutting, assembling, and disassembling tasks. The 0.61 gal reservoir comes factory-filled with hydraulic oil so the unit is ready for immediate use. A 3 m remote actuator keeps the operator clear of the work zone.

Flow and Connection Limits

Maximum hydraulic flow reaches 0.8 L/min with no load and drops to 0.16 L/min under load, so cycle times lengthen as resistance increases. The pump requires a compressed-air source capable of 340 L/min at the specified inlet pressure range. Connections are fixed at NPT 1/4 in for the air inlet and NPT 3/8 in for the high-pressure oil outlet. No internal pressure regulator or flow-control valve is mentioned in the data.

Upgrade From Manual or Lower-Pressure Units

This pump replaces hand-operated hydraulic pumps and lower-pressure air-over-hydraulic units when faster actuation and remote safety are required. The jump is worth it for jobs that demand consistent 10000 PSI output and the ability to trigger the ram from a distance. It does not suit applications needing higher flow rates, integrated pressure gauges, or automatic pressure-holding circuits not described in the specifications.

Highlights

  • Delivers 10000 PSI for heavy lifting and pressing tasks
  • 3 m remote keeps operator clear of hazards
  • Factory-filled 2.3 L reservoir cuts setup time
  • NPT 1/4 in air inlet and NPT 3/8 in oil outlet fit standard fittings
  • Runs on 110 to 145 PSI shop air supply

Specifications

TypeOther Appliances
Width9.65

Questions about this item

Which reservoir capacity should I choose for this pump?

The unit comes with a single 0.61 gal / 2.3 L tank that is factory-filled with hydraulic oil, so there is no capacity option to select.

What does the 10000 PSI rating mean when the pump is connected to a press?

It can deliver up to 10000 PSI at the NPT 3/8 in outlet when supplied with 110-145 PSI shop air, providing 0.16 L/min flow under load.

What does the NPT 3/8 inch outlet cap in practice?

The NPT 3/8 in high-pressure outlet limits the maximum working pressure to 10000 PSI and the loaded flow to 0.16 L/min.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.