We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black trapezoid steel table legs 16 inches tall with rectangular tube profile

VEVOR

VEVOR T6712-16 16 inch Trapezoid Steel Table Legs Black

SKU CH-42HS-X0K59

Pair of 16 inch trapezoid carbon-steel legs support up to 400 lbs and include ten self-tapping screws for quick mounting

  • TypeOther Appliances
  • Stable trapezoid stance with 11.22 inch base width
  • Supports heavy tops at 400 lbs maximum load
  • Quick mounting using 10 included self-tapping screws
  • Carbon steel legs resist bending with 1.38 inch tube
  • Fits standard 16 inch height coffee tables and benches

16-Inch Trapezoid Steel Table Legs

These 16-inch carbon-steel legs come as a single piece with ten self-tapping screws and an instruction manual. They suit DIY builders adding height to coffee tables, desks, benches or night stands.

400 lbs Maximum Load Limit

The rectangular tube measures 1.38 inches across and supports up to 400 lbs. Mounting holes are 0.24 inches in diameter, so the supplied ST 3.5 x 30 mm screws are the only fasteners guaranteed to fit.

Replaces Shorter or Weaker Legs

Swapping out lower-profile or lighter-duty legs raises the work surface by 16 inches and adds 400 lbs capacity. The jump is worth it when the existing base cannot carry the intended top or when a higher stance is required.

Highlights

  • Stable trapezoid stance with 11.22 inch base width
  • Supports heavy tops at 400 lbs maximum load
  • Quick mounting using 10 included self-tapping screws
  • Carbon steel legs resist bending with 1.38 inch tube
  • Fits standard 16 inch height coffee tables and benches

Specifications

TypeOther Appliances

Questions about this item

One 16 inch pair or two for a wider bench?

Each pair stands 16 inches tall with an 11.22 inch bottom spread and 6.9 inch top width, so one set supports a single tabletop; add a second set only if the piece needs four legs.

Will the 400 lb rating hold a solid wood top plus clutter?

The carbon-steel legs are tested to 400 lbs total, so a heavy top and everyday items stay well within the limit.

Do the ST 3.5 x 30 mm screws need 6 mm pilot holes in hardwood?

The 6 mm mounting holes match the supplied self-tapping screws; drill 6 mm clearance holes in hardwood to prevent splitting.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.