We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten square stainless steel glass clamps with decorative covers and hex wrenches

VEVOR

VEVOR SZBLJ02 Glass Clamp 10 PCS 0.31-0.47 in 304 Stainless Steel

SKU CH-Y7SS-C6STS MPN SZBLJ02

Ten square 304 stainless-steel clamps hold 0.31-0.47 in tempered glass without drilling the panels

  • TypeOther Appliances
  • Width9.65
  • 10-piece set covers extended railing runs
  • SUS304 stainless steel resists corrosion outdoors
  • Adjustable pads grip 8–12 mm glass without drilling
  • 55 mm groove depth secures panels firmly
  • Includes expansion screws and hex wrenches for mounting

Glass clamps for 8-12 mm tempered glass

The VEVOR SZBLJ02 kit supplies ten square brackets machined from SUS304 stainless steel. Each clamp accepts glass between 0.31" and 0.47" thick and mounts to floors or walls with the included M8*80 expansion screws. The set is intended for balcony, garden or stair railing projects where drilling the glass panels is not desired.

Fixed metal hardware with no moving parts

Because the clamps are solid stainless steel, they generate no noise, draw no power and produce no heat during use. The 0.12" wall thickness and 3.94" square footprint distribute load evenly across the mounting surface. A hex wrench is supplied for tightening the adjustable rubber and metal pads against the glass.

Ten-piece kit with 4.13" slot width

The single specification that decides fit is the 4.13" slot width combined with the 0.31-0.47" glass-thickness range. Builders needing a narrower or wider slot, or a different glass gauge, must select another model.

Highlights

  • 10-piece set covers extended railing runs
  • SUS304 stainless steel resists corrosion outdoors
  • Adjustable pads grip 8–12 mm glass without drilling
  • 55 mm groove depth secures panels firmly
  • Includes expansion screws and hex wrenches for mounting

Specifications

TypeOther Appliances
Width9.65

Questions about this item

How do I install the SZBLJ02 clamp using the supplied hex wrench?

Drill four bolt holes in the mounting surface, insert the M8*80 expansion screws, place the decorative cover, slide the glass into the 0.7" deep slot, then use the hex wrench to tighten the adjustable rubber and metal spacers against the 0.31-0.47" thick panel.

What parts of the SZBLJ02 will need replacement after outdoor exposure?

The SUS304 stainless steel body resists rust, but the rubber spacer pads inside the 4.13" wide groove may degrade from UV and temperature cycles and should be inspected periodically for hardening or cracking.

At what glass thickness does the SZBLJ02 clamping force reach its limit?

The adjustable spacers accommodate 0.31 to 0.47 inch tempered glass; beyond 0.47 inch the spacers cannot close sufficiently to maintain a secure grip on the panel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.