VEVOR
VEVOR SPDH-5763 3" x 105' PVC Lay Flat Discharge Hose with Clamps
3-inch lay-flat PVC discharge hose, 105 ft long, includes two clamps for water transfer or pool backwash
- TypeOther Appliances
- Width14.96
- Heavy-duty 1.5 mm PVC resists corrosion for long service
- 105 ft length with 3 in diameter fits high-volume water transfer
- 60 psi burst-proof rating handles demanding discharge tasks
- Operates from -15 °C to 65 °C for year-round use
- Two included clamps enable quick, secure connection
Discharge Hose 105 ft PVC
The VEVOR SPDH-5763 is a 3 inch diameter lay-flat hose built from 1.5 mm thick reinforced PVC fibre. It stretches 105 ft and includes two clamps for quick connection. The blue hose weighs 28.2 lbs and is rated for 60 psi working pressure across a temperature range of 5°F to 149°F.
Clamps Enable Immediate Fit
Two supplied clamps let you secure the hose to a 3 inch or smaller outlet without extra parts. The circular braid construction resists corrosion and bursting, while the lay-flat design rolls compactly for storage in a dry, shady spot after use.
Pool Backwash and Transfer Duty
Suits pool owners and contractors needing a long, weather-proof drain line for backwash or water transfer. Not suited for runs requiring higher pressure than 60 psi, diameters larger than 3 inch, or continuous service outside the stated temperature limits.
Highlights
- Heavy-duty 1.5 mm PVC resists corrosion for long service
- 105 ft length with 3 in diameter fits high-volume water transfer
- 60 psi burst-proof rating handles demanding discharge tasks
- Operates from -15 °C to 65 °C for year-round use
- Two included clamps enable quick, secure connection
Specifications
| Type | Other Appliances |
|---|---|
| Width | 14.96 |
Questions about this item
How often should the 3 in PVC hose and its two clamps be inspected or replaced under normal use?
Inspect the 1.5 mm reinforced PVC wall and both clamps before each season; replace the hose if you see cracks, abrasion or permanent kinks, and replace clamps if the bands or screws show corrosion.
What is the first limit reached when the hose runs continuously at its 60 psi working pressure?
The 60 psi working-pressure rating is the primary limit; sustained pressure above that level risks burst failure before temperature or flow limits are reached.
How hot does the blue PVC lay-flat hose get when transferring water all day in summer heat?
The hose is rated for fluid temperatures up to 149 °F (65 °C); in direct sun the surface will approach ambient temperature but will not exceed the material’s rated range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
YINGHUA
YINGHUA 30A 2-channel relay module optocoupler 5V high low trigger
$10.99
0.00013166BTC
In stock