VEVOR
VEVOR Single Side Burner 17000 BTU LP/NG 304 Stainless Steel with LED
A convertible LP/NG side burner delivering 17000 BTU for outdoor cooking, built from 304 stainless steel with an LED-lit knob
- TypeOther Appliances
- Width16.14
- 17,000 BTU burner delivers strong heat for frying and boiling
- Convertible between propane and natural gas with included nozzles
- 304 stainless steel construction resists corrosion and high temperatures
- LED-lit control knobs give clear visibility during night cooking
- Removable grille and cover simplify cleaning and protect from wind
Single Side Burner 17000 BTU
This single side burner delivers 17000 BTU for outdoor cooking tasks such as frying, stir-frying, boiling and grilling. It operates on either liquid propane or natural gas using the included regulator and convertible nozzles. The unit requires an AC100-240V 50/60Hz supply at 1.0A for the LED control knobs. It is designed for built-in installation in a BBQ grill island.
Thermals and Power Draw
The 17000 BTU burner provides high heat output while maintaining stable performance in windy conditions. Gas input pressures are rated at 4 inches WC for natural gas and 10 inches WC for propane, with a minimum inlet pressure of 1.0 kPa and maximum pipe pressure of 3.45 kPa. Electrical consumption is limited to the 1.0A LED lighting circuit.
304 Stainless Steel Build and Connections
The body is constructed from food-grade 304 stainless steel for corrosion and high-temperature resistance in outdoor environments. A stainless steel cover protects against wind and dust, while the removable grille supports various cooking methods. The gas connection uses a 5/8-18 connector specification. The unit measures 20.47 x 12.6 x 11 in and weighs 18.74 lbs.
Highlights
- 17,000 BTU burner delivers strong heat for frying and boiling
- Convertible between propane and natural gas with included nozzles
- 304 stainless steel construction resists corrosion and high temperatures
- LED-lit control knobs give clear visibility during night cooking
- Removable grille and cover simplify cleaning and protect from wind
Specifications
| Type | Other Appliances |
|---|---|
| Width | 16.14 |
Questions about this item
How do I install the 5/8-18 gas connector and the AC100-240V power for the LED knob?
Connect the 5/8-18 inlet to your gas supply using the supplied regulator and the correct nozzle — LP nozzle is fitted by default, swap to the brass 1.6 mm nozzle for natural gas. Plug the LED power cord into a 100-240 V AC outlet; the unit draws 1.0 A.
What maintenance or replacement will the burner need over time?
Clean the removable grille and stainless cover after each use to prevent grease build-up. Inspect the 5/8-18 connector gaskets and the two supplied regulator gaskets annually; replace them if they show cracking or hardening. The brass nozzles rarely wear but keep spares if you switch fuels often.
What limit appears first during a long, high-heat cook on the 17000 BTU burner?
The regulator caps inlet pressure at 3.45 kPa; if your supply exceeds this the flame will become unstable or shut off before the 304 stainless body reaches its temperature limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



