We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal brake line flaring tool with turret die holder, four dies, pipe cutter in case

VEVOR

VEVOR SAE475 Brake Line Flaring Tool 45 Degree 4 Dies 3/16 1/4 5/16 3/8 Inch

SKU CH-BATV-WDVXV MPN SAE475

Creates 45-degree single, double and bubble flares on 3/16, 1/4, 5/16 and 3/8 inch copper and aluminium tubing using four turret-mounted dies and a 6.3 cm T-handle

  • TypeOther Appliances
  • Width11.02
  • Creates 45 degree single, double and bubble flares in seconds
  • Four dies cover 3/16, 1/4, 5/16 and 3/8 inch tube sizes
  • Works with soft copper and aluminium lines for brake, fuel and transmission repairs
  • Turret-style carrier keeps all dies organised and instantly accessible
  • Includes 40CR steel pipe cutter and 16 cm T-handle for complete service kit

Brake Line Flaring Tool Kit

The VEVOR SAE475 brake line flaring tool creates 45 degree single, double, and bubble flares on copper and aluminium tubing. It includes four dies for 3/16 inch, 1/4 inch, 5/16 inch, and 3/8 inch tube sizes. A turret-style carrier keeps dies organised and a 40CR steel pipe cutter is supplied in the tool box.

Suits Brake and Fuel Line Repairs

Mechanics and DIY owners working on brake, transmission cooler, or fuel lines can form leakproof connections quickly. Builders needing metric die sizes outside the four included, or flares other than 45 degree, should select a different kit.

Four Dies Cover 3/16 to 3/8 Inch

The set provides dies at 4.75 mm, 6.35 mm, 8 mm, and 9.5 mm, matching the most common SAE brake line diameters. If your project requires tube sizes outside this range, this tool will not fit.

Highlights

  • Creates 45 degree single, double and bubble flares in seconds
  • Four dies cover 3/16, 1/4, 5/16 and 3/8 inch tube sizes
  • Works with soft copper and aluminium lines for brake, fuel and transmission repairs
  • Turret-style carrier keeps all dies organised and instantly accessible
  • Includes 40CR steel pipe cutter and 16 cm T-handle for complete service kit

Specifications

TypeOther Appliances
Width11.02

Questions about this item

How do I set up the SAE475 turret die for a 3/16 inch line without cross-threading?

Select the 4.75 mm die in the 45 degree turret, clamp the tube flush with the die face, then advance the 6.3 inch T-handle in smooth turns until the flare seats fully.

Which parts of the SAE475 kit will wear first and need replacement?

The 40CR steel pipe cutter blade dulls with repeated copper or aluminum cuts; the four flare dies and turret carrier are hardened steel and typically outlast the cutter.

At what tube size does the SAE475 reach its flaring limit under continuous use?

The largest supplied die is 9.5 mm (3/8 inch); flaring beyond that diameter exceeds the tool's capacity and risks incomplete seals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.