We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal rack with three angled shelves for gas cylinders, powder-coated steel frame, mounting hardware visible

VEVOR

VEVOR Refrigerant Tank Rack 3×30-50lb 14.64x13.97x46.06 in specialty appliance

SKU CH-K0Y0-PP50B

Holds three 30-50 lb refrigerant cylinders on adjustable carbon-steel shelves rated 50 lbs per tier with tilt design and vehicle-mount hardware

  • TypeOther Appliances
  • Width4.84
  • Holds three 30-50 lb tanks in one compact rack
  • Each tier supports 50 lbs with 1.5 mm carbon steel construction
  • Tilted shelves and side fixing bars stop cylinders sliding during transport
  • Powder coating on A3 steel resists corrosion for long service life
  • Adjustable front and rear holes fit different tank diameters precisely

Versatile Cylinder Storage

The VEVOR refrigerant tank rack holds three standard bottles weighing 30 to 50 lbs each. Adjustable front and rear holes let you set shelf and stopper heights for different tank sizes. The unit measures 14.64 by 13.97 by 46.06 inches and is built from 1.5 mm thick carbon steel with a powder coating.

Transport-Focused Build

Installers who need to move gas cylinders between job sites will value the tilted shelves and included fixing strips. The pre-drilled bars secure the rack to a vehicle floor so tanks cannot shift during transit. Facilities that only store tanks in a fixed location may not need the transport hardware.

Three-Tier Capacity

Each tier is rated for 50 lbs, giving a total of three bottles per rack. If your workflow requires more than three cylinders at once, this unit will not provide enough slots.

Highlights

  • Holds three 30-50 lb tanks in one compact rack
  • Each tier supports 50 lbs with 1.5 mm carbon steel construction
  • Tilted shelves and side fixing bars stop cylinders sliding during transport
  • Powder coating on A3 steel resists corrosion for long service life
  • Adjustable front and rear holes fit different tank diameters precisely

Specifications

TypeOther Appliances
Width4.84

Questions about this item

How do I mount the rack in a van using the pre-drilled holes and included hardware?

Bolt the long fixing strips and right-angle fixing strips to the vehicle floor through the pre-drilled holes using the 47 M6×12 screws and 53 M6 flange nuts, then secure each tank with the supplied straps and rings.

What parts will need checking or replacing after extended use?

Inspect the three straps and six rings for wear, and verify the M6 screws and flange nuts remain tight; the powder-coated A3 steel frame itself requires no scheduled replacement.

At what load does the rack reach its rated limit per tier?

Each shelf is rated for 50 lbs (22.7 kg), so the limit appears when any single tier carries a 50 lb tank.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.