VEVOR
VEVOR RC-22 Electric Hydraulic Rebar Cutter 1350W 110V 22mm
Portable 1350 W hydraulic rebar cutter slices 4–22 mm Grade 60 bars in 3.5–4.5 seconds with no sparks, supplied in a steel carry box
- TypeOther Appliances
- Cuts up to 22 mm Grade 60 rebar in 3.5-4.5 seconds
- 1350 W pure copper motor drives hydraulic pump for low-noise operation
- Cold cutting blade avoids sparks and iron debris for safer work
- Weighs 33 lbs with stainless storage box for site portability
- CE and RoHS certified for construction and rescue applications
Portable Hydraulic Rebar Cutter
The VEVOR RC-22 is a 1350W electric hydraulic tool designed to cut reinforcing steel bars from 4 mm up to 22 mm diameter. It operates on a standard 110V AC supply and completes each cut in 3.5 to 4.5 seconds. The cold-cutting action produces no sparks or metal debris, making it suitable for construction crews and rescue teams who need fast, clean cuts on Grade 60 rebar.
110V Single-Phase Power Constraint
Because the cutter draws 1350W at 110V 60Hz, it requires a circuit that can sustain the load without voltage drop. Long extension cords or undersized generators will reduce hydraulic pressure and slow the cutting cycle. The unit ships with 46# hydraulic oil and a sealed pump; oil changes are the only routine maintenance, but the 110V supply limits use to sites with compatible mains or adequate generator capacity.
22 mm Maximum Capacity Headroom
The cutter handles #3 through #7 Grade 60 rebar, topping out at 22 mm diameter. It will not cut larger bar stock, bundled bars or hardened alloys beyond the stated grade. At 14.97 kg net weight the tool is portable enough for one-person carry in its 485 x 195 x 285 mm stainless box, yet the 22 mm ceiling means crews working with #8 or larger rebar must bring a different machine.
Highlights
- Cuts up to 22 mm Grade 60 rebar in 3.5-4.5 seconds
- 1350 W pure copper motor drives hydraulic pump for low-noise operation
- Cold cutting blade avoids sparks and iron debris for safer work
- Weighs 33 lbs with stainless storage box for site portability
- CE and RoHS certified for construction and rescue applications
Specifications
| Type | Other Appliances |
|---|
Questions about this item
What is the maximum rebar diameter this 1350W cutter can handle?
It cuts up to 22 mm (#7 Grade 60) rebar, with a minimum of 4 mm (#3).
How long does a typical cut take once the tool is running on site?
Each cut takes 3.5 to 4.5 seconds, with no sparks or metal debris produced.
What hydraulic oil standard does the 110V system require and what does it limit?
The unit uses 46# hydraulic oil, which sets the fluid viscosity for the pump-driven squeeze action.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
