We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green and red twin rubber hose coiled, 1/4 inch diameter, B fittings visible

VEVOR

VEVOR Oxygen Acetylene Hose 1/4-Inch 25FT Twin Welding Hose 300PSI T-Grade

SKU CH-R60B-P7S2Q

25-foot twin hose delivers oxygen and fuel gas at 300 PSI with 9/16"-18 B fittings

  • TypeOther Appliances
  • Width11.42
  • 25 ft length gives extended reach for workshop tasks
  • 1/4 in bore and 300 PSI rating deliver strong gas flow for cutting
  • T-grade rubber resists kinks and all-weather wear for lasting service
  • 9/16-18 B fittings with colour-coded threads ensure leak-free hook-up
  • Bend restrictors at each end reduce kinking to prolong hose life

25 ft twin welding hose for gas work

This 25 ft twin welding hose delivers oxygen and fuel gas to cutting or brazing torches. The 1/4 inch bore handles oxygen, acetylene, propane or natural gas at up to 300 PSI working pressure. It suits professional welders, maintenance crews and hobbyists who need a single, colour-coded line set for everyday shop tasks.

T-grade rubber with B-size 9/16-18 fittings

T-grade rubber resists oil, ozone and flame while staying flexible in cold weather. The green oxygen hose carries a 9/16-18 right-hand thread and the red fuel hose a 9/16-18 left-hand thread, both B-size for standard torch handles. Integral bend restrictors at each end reduce kinking when the hose is dragged across a bench or floor.

Ready-to-use 5.4 lb assembly in one box

The package contains the complete twin hose assembly with factory-crimped fittings, so no separate clamps or ferrules are required. At 5.4 lbs the coil is light enough to carry to a job site yet long enough to reach across a typical work bay. Users who need longer runs or different fitting styles will need additional hose sections or adapters.

Highlights

  • 25 ft length gives extended reach for workshop tasks
  • 1/4 in bore and 300 PSI rating deliver strong gas flow for cutting
  • T-grade rubber resists kinks and all-weather wear for lasting service
  • 9/16-18 B fittings with colour-coded threads ensure leak-free hook-up
  • Bend restrictors at each end reduce kinking to prolong hose life

Specifications

TypeOther Appliances
Width11.42

Questions about this item

What does the T-Grade rating mean for the 300 PSI working pressure?

T-Grade indicates the hose is approved for oxygen and fuel gases such as acetylene, propane and natural gas at a maximum working pressure of 300 PSI with a 900 PSI burst rating.

What clearance is needed for the 9/16"-18 B fittings and bend restrictors?

Each hose has a 1/4-inch inner diameter and an outer profile of roughly 1.6 inches wide by 0.8 inches thick, so allow at least that much space around the fittings and restrictors.

How do I attach the left-hand and right-hand threads without crossing them?

Connect the red hose with the 9/16"-18 LH fitting to the fuel-gas regulator and the green hose with the 9/16"-18 RH fitting to the oxygen regulator; the colour code matches the thread direction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.