We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Retractable air hose reel with steel housing and 100 ft rubber hose

VEVOR

VEVOR NT-A30 Retractable Air Hose Reel 3/8 in 100 ft 300 PSI 5 ft Lead-in 1/4 in NPT

SKU CH-KPEJ-JASPE

A 100 ft, 3/8 in rubber hose reel rated for 300 PSI with auto-rewind and a 5 ft lead-in for ceiling or wall mounting

  • TypeOther Appliances
  • Width7.28
  • 100 ft hose reaches distant work areas
  • 300 PSI rating handles demanding pneumatic tools
  • 5 ft lead-in hose connects directly to compressor
  • Four non-snag rollers guide hose smoothly during rewind
  • Heavy-duty steel frame mounts securely to wall or ceiling

Retractable Air Hose Reel 100 ft

The VEVOR NT-A30 is a ceiling or wall mounted retractable air hose reel built for workshops and garages that need a long reach. It carries a 100 ft rubber hose with a 3/8 in outer diameter rated to 300 PSI, plus a 5 ft lead-in hose ending in a 1/4 in NPT fitting. The single arm steel frame weighs 40.1 lbs and measures 17.3 x 6.3 x 18.9 in.

Installation and common issues

Mount the reel using the four supplied expansion bolts on a solid ceiling joist or wall stud that can support the weight. The four non-snag rollers guide the hose during extension and rewind, but the spring tension is strong; keep hands clear of the hose path when releasing the latch. If the hose fails to retract fully, check that the rollers spin freely and that the hose is not twisted or caught on nearby hardware.

Maximum working pressure 300 PSI

The hose is rated for a maximum working pressure of 300 PSI, which determines whether the reel matches your compressor output and tool requirements. Verify that your compressor cut-out pressure and any inline regulators stay at or below this limit before connecting. The 1/4 in NPT connector is the only interface provided; adapters are not included.

Highlights

  • 100 ft hose reaches distant work areas
  • 300 PSI rating handles demanding pneumatic tools
  • 5 ft lead-in hose connects directly to compressor
  • Four non-snag rollers guide hose smoothly during rewind
  • Heavy-duty steel frame mounts securely to wall or ceiling

Specifications

TypeOther Appliances
Width7.28

Questions about this item

How can I confirm the NT-A30 reel is rewinding correctly after I mount it?

Pull the 100 ft hose out fully, let the auto-rewind engage and watch all four non-snag rollers guide the 3/8 in rubber hose back evenly without binding or kinking.

What components are included with the NT-A30 and what must I supply myself?

The box contains four hose reels, a user manual and four expansion bolts for ceiling or wall mounting; you must provide the 1/4 in NPT air supply fitting and any additional piping or thread sealant.

Which hose length and pressure rating should I select for a workshop compressor?

This model is offered only as a 100 ft, 3/8 in hose rated to 300 PSI with a 5 ft lead-in, so choose it when you need that exact reach and pressure capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.