VEVOR
VEVOR NT-A15 Retractable Air Hose Reel 3/8 in x 50 ft 300 PSI
A 50-foot hybrid hose on a spring-driven steel reel rated for 300 PSI with ceiling or wall mounting
- TypeOther Appliances
- Width16.93
- 50 ft hybrid hose reaches distant work areas
- 300 psi working pressure handles demanding pneumatic tools
- DC03 steel double-arm reel resists deformation under load
- 5 ft lead-in hose connects reel to compressor supply
- Ceiling or wall mount bracket included for flexible installation
50 ft Hybrid Air Hose Reel
The VEVOR NT-A15 is a retractable reel built around a 50 ft hybrid hose with a 3/8 in internal diameter. It targets workshops and garages that need a tidy, ceiling or wall mounted supply line for pneumatic tools. The steel housing and 5 ft lead in hose keep the work area clear when the reel is not in use.
300 PSI Working Pressure Limit
The hose is rated for a maximum working pressure of 300 psi, which sets the ceiling for any compressor or tool connected to it. The 1/4 in NPT threads limit the flow capacity to fittings of that size. Operating outside the stated temperature range of -4° to 113°F risks material degradation and pressure failure.
Bolt On Mounting With Fixed Hose Length
Installation uses the supplied pre mounted bracket and four expansion bolts for concrete or solid wood structures. The 23 lb unit needs secure anchoring to prevent vibration loosening. The hose length cannot be extended or shortened, so the reel must be positioned within reach of every intended work point. Common issues arise when the mounting surface cannot hold the weight or when the fixed 50 ft reach falls short of the layout.
Highlights
- 50 ft hybrid hose reaches distant work areas
- 300 psi working pressure handles demanding pneumatic tools
- DC03 steel double-arm reel resists deformation under load
- 5 ft lead-in hose connects reel to compressor supply
- Ceiling or wall mount bracket included for flexible installation
Specifications
| Type | Other Appliances |
|---|---|
| Width | 16.93 |
Questions about this item
Should I pick the 50-foot hybrid hose or a different length for my compressor?
This model ships with a fixed 50-foot hybrid rubber-and-PVC hose rated at 300 psi; no alternative lengths are offered for the NT-A15.
What does the 300 psi working pressure mean when the reel is mounted on my wall?
The hose is tested to handle 300 psi continuously, so it will safely deliver full compressor pressure to your tools without bursting.
How does the 1/4-inch NPT thread affect the tools I can connect?
The 1/4-inch NPT fittings mate with standard air-tool couplers, limiting flow to what that thread size can pass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
