VEVOR
VEVOR N851NP 16-Gauge Medium Crown Pneumatic Stapler 7/16" 1-2" 70-120 PSI
Drives 16-gauge medium-crown staples from 25 mm to 50 mm at 70-120 PSI with a 100-staple magazine
- TypeOther Appliances
- Width3.74
- Fits 16-gauge 7/16" crown staples from 1" to 2" for versatile fastening
- Magazine holds up to 100 staples to reduce reload frequency
- Sequential firing mode prevents accidental discharge for safer operation
- Aluminum alloy housing delivers high strength with a weight of 5.62 lbs
- Operates at 70-120 PSI through a 1/4" NPT air inlet
Purpose & User
The VEVOR N851NP is a 16-gauge medium crown pneumatic stapler designed for construction tasks such as roof decking, wall sheathing, fencing and subflooring. It accepts staples with a 7/16-inch crown and lengths from 1 to 2 inches. The tool suits professional contractors and serious DIYers who need an air-powered fastening solution for heavy-duty applications. It is not suited for finish carpentry or light upholstery work requiring finer gauge staples.
Setup Requirements
Before use, verify your compressor delivers between 70 and 120 PSI at the tool inlet. The gun connects via a 1/4-inch NPT air fitting, so ensure your hose has the matching coupler. Staples are not included; you must purchase 16-gauge medium crown strips separately. The magazine holds up to 100 pieces per load. Lubricate the mechanism regularly with pneumatic tool oil to maintain seal performance.
Sustained Operation
The aluminium alloy housing weighs 5.62 lbs and measures 14.37 by 3.35 by 11.81 inches, providing a rigid frame that resists flex during repetitive firing. Sequential firing mode prevents accidental discharge, letting the operator maintain a steady pace without misfires. The high-capacity magazine reduces reload frequency, supporting longer continuous runs on decking or sheathing jobs. Heat buildup is minimal in pneumatic designs, so output stays consistent across extended shifts.
Highlights
- Fits 16-gauge 7/16" crown staples from 1" to 2" for versatile fastening
- Magazine holds up to 100 staples to reduce reload frequency
- Sequential firing mode prevents accidental discharge for safer operation
- Aluminum alloy housing delivers high strength with a weight of 5.62 lbs
- Operates at 70-120 PSI through a 1/4" NPT air inlet
Specifications
| Type | Other Appliances |
|---|---|
| Width | 3.74 |
Questions about this item
Does the N851NP ship with staples or do I need to buy 16-gauge 7/16-inch crown staples separately?
Staples are not included; you must purchase 16-gauge medium crown staples with a 7/16-inch (10.8 mm) crown and 1-inch to 2-inch (25 mm to 50 mm) length separately.
How do I choose between the 1-inch and 2-inch staple lengths for roof decking versus subflooring?
Select staple length based on material thickness: 1-inch (25 mm) staples suit thinner sheathing while 2-inch (50 mm) staples penetrate thicker subfloor or decking; the magazine accepts any length in that range up to 100 pieces.
What does the 70-120 PSI operating range mean for my compressor setup?
The tool requires a compressor that can deliver 70 to 120 PSI through a 1/4-inch NPT air inlet; running at the lower end reduces driving force while the upper end maximises penetration in dense lumber.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
