We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver pneumatic carton stapler with adjustable depth settings and aluminium alloy body

VEVOR

VEVOR MTA18 Pneumatic Carton Closing Stapler 13 Gauge 1-3/8" Crown 5/8" & 3/4" Legs 70-120 PSI

SKU CH-4606-E4039

Pneumatic carton closing stapler drives 13-gauge staples with a 34.8 mm crown and 16 mm or 19 mm legs at 70-120 PSI

  • TypeOther Appliances
  • Width6.3
  • Adjustable depth handles single to triple-wall cartons with 16 mm and 19 mm leg settings
  • 100-staple magazine cuts reload frequency during high-volume packaging runs
  • Sequential firing mode prevents accidental discharge for safer operation
  • Lightweight aluminum-alloy body at 3 kg reduces operator fatigue over long shifts
  • 70–120 PSI operating range works with standard shop compressors via 1/4" NPT inlet

VEVOR MTA18 Pneumatic Carton Stapler

This 13-gauge pneumatic staple gun drives carton-closing staples with a 1-3/8 inch crown and 5/8 or 3/4 inch leg lengths. It operates at 70 to 120 PSI through a 1/4 inch NPT air inlet and suits packaging lines, warehouses, and light manufacturing cells that close single, double, or triple-layer cardboard boxes.

100-staple magazine and dual depth settings

The aluminium alloy magazine holds up to 100 staples, reducing reload frequency during sustained runs. Two depth settings match 16 mm and 19 mm leg lengths, so the same tool handles varying board thicknesses without swapping hardware. Sequential firing prevents accidental discharge. The tool does not suit applications requiring longer legs, wider crowns, or staple types outside the specified carton-closing range.

Four metric wrenches and safety goggles included

The package supplies M3 (2.5 mm), M4 (3 mm), M5 (4 mm), and M8 (6 mm) wrenches for routine adjustments and maintenance. Safety goggles provide basic eye protection during operation. Staples are not included and must be purchased separately. No lubricant, air hose, or carrying case is supplied.

Highlights

  • Adjustable depth handles single to triple-wall cartons with 16 mm and 19 mm leg settings
  • 100-staple magazine cuts reload frequency during high-volume packaging runs
  • Sequential firing mode prevents accidental discharge for safer operation
  • Lightweight aluminum-alloy body at 3 kg reduces operator fatigue over long shifts
  • 70–120 PSI operating range works with standard shop compressors via 1/4" NPT inlet

Specifications

TypeOther Appliances
Width6.3

Questions about this item

Will the 1/4" NPT air inlet on the MTA18 connect directly to my existing compressor hose?

Yes, the stapler uses a standard 1/4" NPT air inlet, which matches most common compressor hoses and quick-connect fittings used in workshop setups.

How do I confirm the depth setting is correct for double-wall boxes after I install the tool?

Fire a test staple into scrap double-wall cardboard; the crown should sit flush without crushing the liner, and the 5/8" or 3/4" leg should fully penetrate and clinch underneath.

Which staples and accessories are included with the MTA18, and what must I buy separately?

The box contains the stapler, M3/2.5 mm, M4/3 mm, M5/4 mm, M8/6 mm wrenches, and safety goggles. Compatible 13-gauge, 1-3/8" crown, 5/8" and 3/4" leg staples are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.