VEVOR
VEVOR MT8016LN 21-Gauge Pneumatic Staple Gun 1/2" Crown 1/4-5/8" 150pcs Mag 70-100 PSI
A 21-gauge pneumatic stapler for 80-series fine-wire staples with a 1/2-inch crown, 1/4 to 5/8-inch length range, 150-staple magazine, and 70 to 100 PSI operating pressure
- Drives 150 staples per load for fewer reloads
- Extended 220 mm nose reaches tight corners
- Fires 80 series staples from 6 mm to 16 mm
- Operates at 70 to 100 PSI with 1/4 NPT inlet
- Lightweight 1.1 kg aluminium alloy body reduces fatigue
21-Gauge Pneumatic Staple Gun
The VEVOR MT8016LN is a 21-gauge pneumatic staple gun built for 80 series fine wire staples. It accepts 1/2-inch crown staples from 1/4 to 5/8 inch in length. A 150-piece magazine reduces reload frequency during extended work sessions.
Upholstery and detail woodworking
The long-nose design reaches tight corners and confined spaces common in upholstery, cabinetry and trim tasks. Users needing wider crowns, heavier gauge wire or cordless operation should consider a different tool class.
70 to 100 PSI operating pressure
The gun requires a compressed-air supply regulated between 70 and 100 PSI through a 1/4-inch NPT inlet. Verify your compressor delivers consistent pressure in this range before purchase.
Highlights
- Drives 150 staples per load for fewer reloads
- Extended 220 mm nose reaches tight corners
- Fires 80 series staples from 6 mm to 16 mm
- Operates at 70 to 100 PSI with 1/4 NPT inlet
- Lightweight 1.1 kg aluminium alloy body reduces fatigue
Specifications
No published specifications for this item yet.
Questions about this item
How far can the 1/4 to 5/8 inch staples reach into material when driven at 70 to 100 PSI?
The gun drives 80 series fine wire staples from 6 mm to 16 mm long; at the rated 70 to 100 PSI they penetrate wood, fabric or insulation to the full staple depth.
What does the 1/4 inch NPT air inlet mean for my compressor hose?
The tool uses a standard 1/4 inch NPT thread, so it connects directly to common shop air hoses and quick-couplers without adapters.
Will the 220 x 190 x 45 mm body fit inside a 90 mm deep cabinet rail?
The gun measures 8.66 x 7.48 x 1.77 inches, so its 45 mm thickness clears a 90 mm rail with room for the extended nose.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
