VEVOR
VEVOR MMA-205 205A 110/220V MMA Lift TIG Welder
Dual-voltage 110/220V inverter delivers 205A for MMA stick and lift TIG welding with hot start, arc force and anti-stick controls
- TypeOther Appliances
- Width10.83
- Dual 110/220V input suits home or garage power
- 205A output with 20% duty cycle at 40°C handles thick plate
- 2-in-1 Stick and Lift TIG modes expand project range
- LED display shows amperage clearly for precise adjustment
- Hot Start and Anti-Stick reduce electrode sticking on 6010 6011 6013 7018 rods
Versatile 2-in-1 MMA & Lift TIG Welder
This 205A machine supports MMA stick welding and Lift TIG modes for home DIY, garage workshops, and car repairs. The TIG torch is not included and must be purchased separately to use the TIG function. It runs on 110/220V dual voltage input for flexible power options.
Thermal Performance at Rated Duty Cycle
The unit delivers a 20% load ratio at 40°C ambient temperature, meaning it can weld continuously for two minutes out of every ten at full output. IGBT inverter technology provides efficient power conversion while the plastic shell and cold-rolled steel Q235 construction aids heat dissipation during normal operation.
Compact Build with Essential Accessories
The welder measures 380 x 160 x 320 mm and weighs 6.9 kg, making it portable around the workshop. A ground clamp, electrode holder, welding brush, and conversion plug are supplied in the box. The clear LED display allows quick monitoring and adjustment of settings during use.
Highlights
- Dual 110/220V input suits home or garage power
- 205A output with 20% duty cycle at 40°C handles thick plate
- 2-in-1 Stick and Lift TIG modes expand project range
- LED display shows amperage clearly for precise adjustment
- Hot Start and Anti-Stick reduce electrode sticking on 6010 6011 6013 7018 rods
Specifications
| Type | Other Appliances |
|---|---|
| Width | 10.83 |
Questions about this item
How do I install the VEVOR MMA-205 welder and what step do people often miss?
Connect the ground clamp and electrode holder, then plug the unit into a 110 V or 220 V outlet using the supplied conversion plug; the step many miss is buying a separate Lift TIG torch because the machine supports the mode but ships without one.
What maintenance or replacement will the MMA-205 need later?
Expect to replace consumable electrodes such as 6010, 6011, 6013 or 7018 rods as they burn down, and periodically clean the plastic shell and cold-rolled steel Q235 chassis vents to keep the IGBT inverter cooling properly.
What limit appears first during sustained welding with the MMA-205?
The 20 % duty cycle at 40 °C ambient temperature means the unit must rest after two minutes of continuous welding at the 205 A maximum output to avoid thermal shutdown.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
